User manual PANASONIC KX-TG2236S

[. . . ] 2. 4GHz Digital Cordless Phone Preparation Basic Operation Advanced Operation Useful Information Operating Instructions Model No. KX-TG2236S Pulse-or-tone dialing capability Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 15 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 63 before use. Read and understand all instructions. Caller ID and Call Waiting Service and Voice Mail Service, where available, are telephone company services. [. . . ] ·If an incoming call is received, the intercom call stops and the unit starts to ring. To answer, press , or (SP-PHONE). Transferring a Call Using the Intercom The intercom can be used during a call. This feature enables you to transfer a call between the handset and the base unit. From the handset to the base unit From the base unit to the handset 1 2 Handset: During a call, press (HOLD/INTERCOM). ·The call is put on hold and "Hold" is displayed. 1 2 Base unit: During a call, press (HOLD/LOCATOR/INTERCOM). ·The call is put on hold and SP-PHONE indicator flashes. Handset: Press (HOLD/INTERCOM) again. Talk to the paged party after the beeps. ·"Intercom hold" is displayed. ·If the base unit user does not answer, press or to return to call. Base unit: Press (HOLD/LOCATOR/INTERCOM) again. ·"Paging Press INTERCOM" is displayed on the handset. ·If the handset user does not answer, press (SP-PHONE) to return to call. Advanced Operation 3 4 Base unit: When the paging party's voice is heard, answer using the MIC. Base unit: To answer the call, press (SP-PHONE). ·The transfer is complete. 3 4 Handset: Press (HOLD/INTERCOM) to answer the page. ·"Intercom hold" is displayed. Handset: To answer the call, press or . ·The transfer is complete. For assistance, please call: 1-800-211-PANA(7262) 47 Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically for you when your line is busy or if calls are not answered, and caller can leave their messages at the voice mail box virtually located at the telephone company. After the voice mail box has received messages, the unit will indicate it in two ways: (a) "Voicemail" displayed on the handset, and (b) the VM indicator on the base unit will flash. To use this feature, you must first store your access number. Storing a Voice Mail Access Number Make sure the unit is not being used and the handset is lifted off the base unit. 1 2 3 4 5 6 7 8 Press (FUNCTION). Scroll to "Program" by pressing Ö or Ñ. Scroll to "Save mailbox#" by pressing Ö or Ñ. Enter your access number, up to 32 digits. ·You may enter pauses*(see page 49). ·Each time you press (CLEAR), a digit is erased. To erase all digits, press and hold (CLEAR). Ringer pattern HProgram -------------Set flash time HSave mailbox# Voicemail tone 1234567PPP890 IH G=Next Press Ö (Next key). ·If you want to edit the entered number, press Ñ (Edit key) and return to step 6. 1234567PPP890 F=Edit H=Save Press á (Save key). ·A beep sounds. ·To exit the programming mode, press (OFF). 1234567PPP890 Save mailbox# ·You can exit the programming mode any time by pressing (OFF). To erase a stored number Repeat steps 1 through 5 \ Press and hold (CLEAR) until all of the digits are erased \ Ö (Next key) \ á (Save key). ·A beep sounds. 48 *For quick access to your voice mail box by using (FLASH/CALL!WAIT/VOICE!MAIL) or (VM), you may add pauses between your voice mail box access number and your mail box password in step 6. 1-222-333-4444 PPPP 8888 Your mail box password Pauses Pressing (REDIAL/PAUSE) once creates a 3. 5 seconds delay and counts as one digit. The delay time depends on a telephone company. [. . . ] in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]