User manual PANASONIC KX-TG2258PW

[. . . ] 2. 4GHz Digital Cordless Answering System Preparation Operating Instructions Model No. KX-TG2258S KX-TG2258PW Pulse-or-tone dialing capability Cordless Telephone Answering System KX-TG2258S Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 63 before use. Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number, then announce the displayed caller's name. [. . . ] 2 Scroll to "Message play" by pressing [ ] or [ ], then press Select. 3 Press [8] to turn on the Answering System. · "Answer set" is heard. 4 Press [OFF]. · To turn the Answering System off, press [0] in step 3. "Answer off" is heard. Monitoring incoming calls While a call is being recorded, you can monitor it through the base unit speaker. · To increase the speaker volume, press VOLUME [ VOLUME [ ]. To decrease volume, press To answer the call with the base unit speakerphone, press [SP-PHONE]. The unit will stop recording. 42 > > > > Listening to Messages You can see the total number of recorded messages on the base unit display. When new messages have been recorded, the NEW MESSAGE indicator flashes. Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 12). Using the Base Unit To play back messages Base Unit NEW MESSAGE Indicator Press [MESSAGE/SLOW TALK]. · The unit announces the number of new messages and only new messages are played back. [MESSAGE/ SLOW TALK] · During playback, the display shows the message number. · At the end of the last message, "End of final message" is heard. The unit will announce the remaining recording time if it is less than 3 minutes. · When you have no new messages, the unit announces "No new messages. All message playback" and plays back all messages. · When you have no messages, the unit announces "No messages". Answering System 43 For assistance, please call: 1-800-211-PANA(7262) Listening to Messages Using the Handset (Remote Operation) To play back messages 1 Press [MENU]. 2 Scroll to "Message play" by pressing [ ] or > [ ], then press Select. Handset > Message play 4:New messages 5:All messages Repeat Skip · The unit announces the number of new messages and only new messages are played back. · The messages will be heard from the speaker. To switch back to the speaker, press [ ]. · [MESSAGE/SLOW TALK], [REPEAT], [SKIP] and [STOP]* can also be used during playback (p. · When you have no new messages, the unit announces "No new messages. All message playback" and plays back all messages. · When you have no messages, the unit announces "No messages". · If you do not press any buttons, the voice menu will start (see below). 3 To end remote operation, press [OFF] or place the handset on the base unit. *If you press [STOP] on the base unit during message playback, operation is stopped. [. . . ] THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. [. . . ]