User manual PANASONIC KX-TG2352W

[. . . ] 2. 4GHz Expandable Cordless Phone System Preparation Operating Instructions Model No. KX-TG2352PW KX-TG2352W Pulse-or-tone dialing capability Basic Operation Advanced Operation Useful Information Model shown is KX-TG2352W. Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 15 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 62 before use. Read and understand all instructions. Caller ID and Call Waiting Service and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. [. . . ] Voice mail [1] To listen to your voice mail message(s) 1 2 3 4 5 Press (MUTE/FUNCTION). Scroll to "V. M. access" by pressing Ö or Ñ, and press á. Save directory HV. M. access Ringer setting Press or . ·The unit is connected to the telephone line and dials the access number (p. 43). Follow the pre-recorded instructions. When finished, press (OFF). Advanced Operation 45 ·If "Store VM acces#" is displayed and 3 beeps sounds, store the number (p. ·If "Voice mail" still remains on the handset even if you have listened to your voice mail message(s), press (MUTE/FUNCTION), and press and hold (HOLD/INTERCOM/CLEAR) until the unit beeps. ·If your voice mail service uses a voice mail tone and the recorded message is over 3 minutes long, "Voice mail" may not be displayed. ·If your voice mail service uses a voice mail tone, the tone will be heard from any parallel connected phone. If you use another phone to retrieve messages, you have to dial your access number manually. For assistance, please call: 1-800-211-PANA(7262) Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (*) before entering access numbers which require tone dialing. ·The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. Muting Your Conversation Press (MUTE/FUNCTION) while talking. ·The display on the right will be shown. (MUTE/FUNCTION) was pressed. Talk <Mute> ·The other party cannot hear your voice but you can hear theirs. ·To release the mute, press (MUTE/FUNCTION) on the handset. ·When you switch between the receiver and speaker, the mute will be released. Handset Locator You can locate the handset or page the handset user from the base unit. 1 To page the handset, press HANDSET LOCATOR ((1) to (3)). ·The IN USE/HOLD indicator flashes. ·The handset will ring for 1 minute. To page all handsets, press HANDSET LOCATOR ((ALL)). ·All handsets will ring for 1 minute. ·When you stop paging with one handset, paging will stop at all handsets. 2 To stop paging: Base unit: Press HANDSET LOCATOR ((ALL) or (1) to (3)). OR Handset: Press any dialing button ((0) to (9), (*) or (#)), , or (OFF). 46 For Call Waiting Service Users Press (FLASH/CALL!WAIT) if you hear a call-waiting tone while talking. ·The first call is put on hold and you can answer the second call. ·To return to the first caller, press (FLASH/CALL!WAIT) again. ·The call waiting service cannot be used when: --the first call is placed on hold, or --a parallel connected telephone is in use. ·If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your handset to display the second caller's information. After you hear a call-waiting tone while talking, the handset will display the caller's name with the phone number and "----Waiting----". BROWN, NANCY 1-555-666-7777 ----Waiting---- ·Please contact your telephone company for details and availability in your area. Advanced Operation How to Use the PAUSE Button (For PBX Line/Long Distance Calls) We recommend you press (PAUSE/REDIAL) if a pause is required for dialing with a PBX or to make a long distance call. Line access number (9) (PBX) (9) \ (PAUSE/REDIAL) \ Phone number ·Pressing (PAUSE/REDIAL) once creates a 3. 5 second pause. [. . . ] in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]