User manual PANASONIC KX-TG2356S

[. . . ] 2. 4 GHz Digital Cordless Answering System Operating Instructions Model No. KX-TG2356 Pulse-or-tone dialing capability The unit is Caller ID compatible. To display the caller's name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read the IMPORTANT SAFETY INSTRUCTIONS on page 77 before use. [. . . ] If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. Using the handset, this feature can be set separately for the handset and base unit. Handset incoming call tone Handset 1 Press [MENU]. 2 Scroll to "Ringer setting" by pressing [d] or [B], then press Select. Ringer setting Incoming call. KBack dB SelectL 3 Scroll to "Incoming call. " by pressing [d] or [B], then press Select. KBack dB SelectL 4 Select "On", "Off" or "2" by pressing [d] or [B]. Incoming call tone :2 KBack dB SaveL 5 Press Save, then press [OFF]. Base unit incoming call tone Handset 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Set base unit KBack dB SelectL 3 Scroll to "Set base unit" by pressing [d] or [B], then press Select. KBack dB SelectL 4 Scroll to "Incoming call. " by pressing [d] or [B], then press Select. Incoming call. KBack dB SelectL 5 Select "On", "Off" or "2" by pressing [d] or [B]. 6 Press Save, then press [OFF]. Incoming call tone :2 KBack dB SaveL 50 Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Key tone KBack dB SelectL 3 Scroll to "Key tone" by pressing [d] or [B], then press Select. KBack dB SelectL Telephone System 4 Select "Off" or "On" by pressing [d] or [B]. Key tone :On KBack dB SaveL 5 Press Save, then press [OFF]. Re-registering the Handset Handset & Base Unit If "No link to base. Move closer to base, try again. " is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit. · Make sure the base unit is not being used. · Have both the handset and base unit nearby during registration. · Follow steps 1and 2 listed below. You have about 1 minute to complete them. 1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds. · The CHARGE indicator flashes. 2 Handset: Press and hold [FLASH/CALL WAIT] until "Handset Registering" is displayed. · When registration is complete, a beep sounds from the handset. · Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit. Handset Registering Handset [1] Registered · If the handset beeps 3 times and "Error!!" is displayed, an error occurred. · You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit. For assistance, please call: 1-800-211-PANA(7262) 51 Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller's message is recorded. · The total recording time of all messages (greeting, incoming and memo) is about 16 minutes. If messages are recorded in noisy rooms, the time may be shortened by up to 3 minutes. · To select the caller's recording time, see page 22. [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. [. . . ]