User manual PANASONIC KX-TG2388B

[. . . ] Operating Instructions 2. 4 GHz Digital Cordless Answering System Model No. KX-TG2388 This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] Press {V} or {^} while the handset is ringing. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}. The handset will ring again as normal the next time a call is Handset ringer tone You can change the ringer tone heard when an outside call is received. Important: L You cannot change the ringer tone for intercom calls. L If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers. L If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if: ­ the caller hangs up before you answer the call, or For assistance, please visit http://www. panasonic. com/consumersupport 39 Programmable Settings ­ another person answers the call using another phone connected on the same line. 3 4 5 Scroll to "Set base unit" by pressing {V} or {^}, then press {Select}. Press{Select} at "Ringer tone". Select the desired ringer tone by pressing {V} or {^}. L The base unit will ring and the ringer tone will change. If the base unit ringer volume has been turned off, the base unit will not ring (page 39). L You can also select the ringer tone by pressing {1} to {7}. Press {Save}, then press {OFF}. 1 2 3 4 Press {MENU}. Scroll to "Ringer setting" by pressing {V} or {^}, then press {Select}. Scroll to "Ringer tone"by pressing {V} or {^}, then press {Select}. Select the desired ringer tone by pressing {V} or {^}. L The handset will ring and the ringer tone will change. If the handset ringer volume has been turned off, the handset will not ring. L You can also select the ringer tone by pressing {1} to {7}. Press {Save}, then press {OFF}. 6 Handset incoming call tone During an intercom call (page 32), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. [. . . ] When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. For assistance, please visit http://www. panasonic. com/consumersupport 71 Useful Information Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]