User manual PANASONIC KX-TG2396B

[. . . ] The (REDIAL) button does not work for Speed Dialer. To dial the number again, hang up and repeat steps 1 to 3. If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased. Store phone numbers again, if necessary. 4 One-Touch Dialer " If a pause is required for dialing, press (PAUSE) in step 4. [. . . ] The (REDIAL) button does not work for One-Touch Dialer. To dial the number again, hang up and repeat steps 1 and 2. If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased. Store phone numbers again, if necessary. For your future reference Serial No. (found on the bottom of the unit) 3-A Storing Phone Numbers in Memory You can store up to 10 phone numbers in the memory stations. The dialing buttons ((0) to (9)) function as memory station numbers. Do not press any memory stations before storing to prevent misoperation. 4-A Storing Phone Numbers in Memory You can store up to 3 phone numbers in the one-touch auto dial buttons ((M1), (M2) or (EMERGENCY)). Do not press any one-touch auto dial buttons before storing to prevent misoperation. It is recommended that you program an emergency number in the (EMERGENCY) button. Date of purchase Name and address of dealer If you need assistance with the set-up or operation, please call 1-800-211-PANA(7262) Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. 9. 5, San Gabriel Industrial Park Carolina, Puerto Rico 00985 Printed in Mexico 1 2 3 4 5 6 7 Lift the handset. Press a memory station number ((0) to (9)). When finished, hang up. To store other numbers, repeat steps 1 through 7. To erase a stored number Lift the handset. ¤ Press (PROGRAM) ¤ ¤ (AUTO) ¤ the memory station number ((0) to (9)) of the phone number to be erased ¤ ¤ (PAUSE) ¤ (PROGRAM). ¤ Hang up. Access numbers entered after pressing ($) (TONE) will not be included when redialing. Wall Phone Plate To temporarily set the handset down during a conversation, place it as shown here. 1 1 1 Hooks 2 Tuck the telephone line cord inside the wall mounting adaptor, and push it in the direction of the arrow (1 and 2). The word "UP WALL" should face upward. 2 1 6 Things You Should Know 6-D Helpful Information From telephone line " Things You Should Know When you ship the product Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the symptom, to the outside of the carton. Symptom 7 1 2 Referencia Rápida 3 Coloque el selector del DIALING MODE a TONE (tono). Si Ud. no puede marcar colóquelo en PULSE (pulso). DIALING MODE " Referencia Rápida 7-B Haciendo Llamadas 1 2 3 Levante el auricular. Marque el número de teléfono. Si Ud. se equivoca al marcar, cuelgue y comience de nuevo desde el paso 1. 6-C Specifications Power Source: Dimensions (H x W x D): Approx. 96 mm x 150 mm x 200 mm (3 25/32q k 5 29/32q k 7 7/8q) Mass (Weight): Dialing Mode: Operating Environment: Approx. 495g (1. 09 lb. ) Tone (DTMF)/Pulse 5°C­40°C (41oF­104oF) 7-A Pasos Iniciales Conecte el cable de la línea telefónica (1). Conecte el cordón del auricular (2), luego confirme el tono para marcar. A toma de teléfono de una sola línea (RJ11C) Cable de la línea telefónica Send the unit to an authorized servicenter, prepaid and adequately insured. Do not send your unit to the Panasonic Consumer Electronics Company listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products. 1 Specifications are subject to change without notice. Environment--do not place the unit in a room where the temperature is less than 5°C (41oF) or greater than 40°C (104oF). [. . . ] Do not use benzine, thinner, or any abrasive powder. If there is any trouble--disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company. [. . . ]