User manual PANASONIC KX-TG2400B

[. . . ] For assistance, visit our website: http://www. panasonic. com for customers in the U. S. A. or Puerto Rico. Table of Contents Introduction About these operating instructions . 10 Calling someone with the speed dialer . 31 Caller ID Service Using Caller ID service . [. . . ] L The outside call rings at the paged handset(s). Transferring a call from the base unit Important: L When you page all handsets, only the handset user who answers first can take the transferred call. Note: L If the paged party does not answer the call, press {SP-PHONE} to return to the call. If not answered within 1 minute, the call will ring at the base unit again. If you still do not answer the call within 4 minutes, the call will be disconnected. 1 2 During an outside call, press {INTERCOM}. To page a specified handset, press its extension number ({1} to {8}). To make a voice announcement to all handsets, press {*} (A), then speak into the MIC when the SP-PHONE indicator stops flashing. L The paged handset user can answer by pressing {C}, {s}, or {INTERCOM}. L If there is no answer, press {INTERCOM} to return to the outside call. To complete the transfer, press {SPPHONE}. 3 4 Transferring a call without speaking to the paged party 1 2 During an outside call, press {INTERCOM}. To page a specified handset, press its extension number ({1} to {8}). To make a voice announcement to all handsets, press {*} (A), then speak into the MIC when the SP-PHONE indicator stops flashing. For assistance, please visit http://www. panasonic. com/consumersupport 39 Intercom Features Conference calls A conference call allows the handset and the base unit or a compatible Panasonic handset (page 6) to speak together with an outside party. Using the base unit 1 2 3 During an outside call, press {INTERCOM}. To page the desired handset, press its extension number ({1} to {8}). To answer the call with the handset, press {OFF}, then press {C} or {s}. To answer the call with the base unit, press {SP-PHONE} 2 times. Monitoring with the handset Setting room monitor Turning on/off the handset's room monitor feature This allows the handset to be monitored. 1 2 Press {INTERCOM}, then press {MONITOR}. To call another handset, press its extension number ({1} to {8}). L Your handset will start to monitor the room through the destination unit. L To monitor from the speaker, press {s}. To switch back to the receiver, press {C}. L The base unit user can stop being monitored by pressing {INTERCOM} or {SP-PHONE}. The monitored handset user can stop being monitored by pressing {OFF}. 1 2 3 4 5 Press {MENU} (center of joystick). Scroll to "Room monitor", then press {SELECT}. Push the joystick up or down repeatedly to select "On" or "Off". [. . . ] You must mail-in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. [. . . ]