User manual PANASONIC KX-TG2403B

[. . . ] 2. 4GHz Cordless Phone Model No. KX-TG2403B Pulse-or-tone dialing capability Operating Instructions PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. 1 2 3 4 5 6 7 Contents by Section Getting Started Making/Answering Calls Speed Dialer One-Touch Dialer Special Features Things You Should Know Referencia rápida Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Attach your purchase receipt here. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer For product service · Panasonic Servicenters are listed in the servicenter directory. · Call 1-800-211-PANA(7262) for the location of an authorized servicenter. · Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customers in the USA or Puerto Rico ONLY When you ship the product · Carefully pack your unit, preferably in the original carton. [. . . ] 1 PressIN(HANDSETÒLOCATOR) on the base the handset beeps for 1 ·The USE/CHARGE indicator flashes and minute. 2 To stop paging, press (HANDSETÒLOCATOR) again or press (TALK) twice on the handset. 4 (DIRECT) One-Touch Dialer Section 4 4-A Storing a Phone Number in the DIRECT Button You can store a phone number in the (DIRECT) button. The stored number is dialed with a one-touch operation. The TALK indicator light must be off before programming. TALK Indicator 1 2 , Press PROGRAM á. ·The TALK indicator flashes. Enter a phone number up to 22 digits. ·If you misdial, press PROGRAM á, and start again from step 1. (TALK) PROGRAM AUTO 3 Press (DIRECT). ·A beep sounds. ·If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (5-D). 4-B Dialing a Stored Number in the DIRECT Button Press (TALK) \ (DIRECT). ·If your line has rotary or pulse service, any access numbers stored after pressing (TONE) will not be dialed. To erase a stored number: press PROGRAM á \ AUTO Ü \ (DIRECT). Special Features 5-F FLASH Button Section 5 Pressing (FLASH) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional), such as call waiting. Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "90, 100, 110, 250, 300, 400, 600, 700 msec (milliseconds)", using the handset near the base unit. Your phone comes from the factory set to "700 msec". The TALK indicator light must be off before programming. Press PROGRAM á \ Dialing button ((1) to (8)) \ AUTO Ü \ \ (FLASH). (1): 90 msec (2): 100 msec (3): 110 msec (4): 250 msec (5): 300 msec (6): 400 msec (7): 600 msec (8): 700 msec ·If 3 beeps sound after programming, a wrong key was pressed. ·If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc. ). Consult your PBX installer for the correct setting. 6 Things You Should Know 6-D Base Unit Location/Noise Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise free operation, the recommended base unit location is: Away from electrical appliances such as a TV, personal computer or another cordless phone. In a HIGH and CENTRAL location with no obstructions such as walls. 6-A Battery Recharge When the RECHARGE indicator flashes or the unit beeps intermittently, place the handset on RECHARGE Indicator the base unit to recharge the battery for 6 hours. ·If you DO NOT recharge the handset battery for more than 15 minutes, the RECHARGE indicator will continue to flash. Battery information After your Panasonic battery is fully charged: Operation While in use (TALK) near the base unit* away from the base unit Approx. battery life Up to 4. 5 hours Up to 3. 5 hours Up to 11 days Note: While using the handset: -- If you are near a microwave oven which is being used, noise may be heard at the receiver. Move away from the microwave oven and closer to the base unit. -- If more than one cordless phone is being used and your handset is near another cordless phone's base unit, noise may be heard. Move away from the other cordless phone's base unit and closer to your base unit. Raise the antennas. While not in use (Standby) *Within about 10 feet (3 m) ·Battery life may vary depending on usage conditions and ambient temperature. ·Clean the handset and the base unit charge contacts with a soft dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. [. . . ] You cannot store a phone number in memory. Previously programmed information is erased. You cannot redial by pressing (REDIAL). (HANDSET!LOCATOR) does not function. The RECHARGE indicator flashes or the unit beeps intermittently. [. . . ]