User manual PANASONIC KX-TG2503S

[. . . ] 2. 4GHz Cordless Phone Model No. KX-TG2503S Pulse-or-tone dialing capability Operating Instructions PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. 1 2 3 4 5 6 7 Contents by Section Getting Started Making/Answering Calls Speed Dialer One-Touch Dialer Special Features Things You Should Know Referencia rápida Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Attach your purchase receipt here. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer For product service · Panasonic Servicenters are listed in the servicenter directory. · Call 1-800-211-PANA(7262) for the location of an authorized servicenter. · Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customers in the USA or Puerto Rico ONLY When you ship the product · Carefully pack your unit, preferably in the original carton. [. . . ] You can select the following flash times: "90, 100, 110, 250, 300, 400, 600, 700 msec (milliseconds)", using the handset near the base unit. Your phone comes from the factory set to "700 msec". The TALK indicator light must be off before programming. Press PROGRAM á \ Dialing button ((1) to (8)) \ AUTO Ü \ \ (FLASH). (1): 90 msec (2): 100 msec (3): 110 msec (4): 250 msec (5): 300 msec (6): 400 msec (7): 600 msec (8): 700 msec ·If 3 beeps sound after programming, a wrong key was pressed. ·If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc. ). Consult your PBX installer for the correct setting. 6 Things You Should Know 6-C Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88 headset. To order, call the accessories telephone number in section 1-A. 6-A Battery Recharge When the RECHARGE indicator flashes or the RECHARGE unit beeps intermittently, place the handset on Indicator the base unit to recharge the battery for 6 hours. ·If you DO NOT recharge the handset battery for more than 15 minutes, the RECHARGE indicator will continue to flash. Connecting the optional headset to the handset Open the headset jack cover, and connect the optional headset to the headset jack as shown. When the optional headset is connected to the handset, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset. Battery information After your Panasonic battery is fully charged: Operation While in use (TALK) near the base unit* away from the base unit Approx. battery life Up to 4. 5 hours Up to 3. 5 hours Up to 11 days H Headset Jack While not in use (Standby) *Within about 10 feet (3 m) ·Battery life may vary depending on usage conditions and ambient temperature. ·Clean the handset and the base unit charge contacts with a soft dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise, the battery may not charge properly. ·If the battery is fully charged, you do not have to place the handset on the base unit until the RECHARGE indicator flashes. ·The battery cannot be overcharged. 6-D Base Unit Location/Noise Calls are transmitted between the base unit and the handset using wireless radio waves. ·Re-install the battery and place the handset on the base unit. ·You are too far from the base unit. ·Place the handset on the base unit and try again. ·Locate the handset and the base unit away from other electrical appliances (6-D). [. . . ] · If the handset is wet, wipe with a soft dry cloth. · The base unit is not designed to be splash resistant. Do not place the wet handset on the base unit. not function. The RECHARGE indicator flashes or the unit beeps intermittently. [. . . ]