User manual PANASONIC KX-TG2583W

[. . . ] 2. 4GHz Cordless Answering System Preparation Model No. KX-TG2583B KX-TG2583S KX-TG2583W Pulse-or-tone dialing capability Operating Instructions Cordless Telephone Answering System KX-TG2583B Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 80 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting. Attach your purchase receipt here. [. . . ] (INTERCOM/CLEAR) MIC Paging the handset from the base unit (Handset locator) Using this feature, you can locate a misplaced handset. 1 Base unit: Press (LOCATOR/INTERCOM). ·"Paging" is displayed on the base unit. ·The handset beeps for 1 minute and "Paging Press INTERCOM" is displayed. ·To stop paging, press (LOCATOR/INTERCOM) again. 2 3 4 52 Handset: Press (INTERCOM/CLEAR) to answer. ·"Intercom" is displayed. MIC (LOCATOR/INTERCOM) Base unit: Talk into the MIC. Handset: To end the intercom, press (INTERCOM/CLEAR). (INTERCOM/CLEAR) During an intercom call: ·Intercom calls can only be ended with the handset. ·If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing Ö on the base unit. ·If an incoming call is received, the intercom call stops and the unit starts to ring. To answer, press (TALK) or (DIGITAL!SP-PHONE). Transferring a Call Using the Intercom The intercom can be used during a call. This feature enables you to transfer a call between the handset and the base unit. Cordless Telephone From the handset to the base unit From the base unit to the handset 1 Handset: During a call, press (INTERCOM/CLEAR). Talk to 1 Base unit: During a call, press (LOCATOR/INTERCOM). ·The call is put on hold and "Paging" is displayed. ·If the handset user does not answer, press (DIGITAL!SP-PHONE). the paged party after the beeps. ·The call is put on hold and "Intercom hold" is displayed. ·If the base unit user does not answer, press (TALK). 2 3 Base unit: When the paging party's voice is heard, answer using the MIC. Base unit: To answer the call, press (DIGITAL!SP-PHONE). ·The transfer is complete. 2 3 Handset: Press (INTERCOM/CLEAR) to answer the page. ·"Intercom hold" is displayed. Handset: To answer the call, press (TALK). ·The transfer is complete. 53 Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. For Call Waiting Service Users Press (FLASH/CALL!WAIT/PLAYBACK) or (CALL!WAIT/FLASH) if you hear a call-waiting tone while talking. ·The first call is put on hold and you can answer the second call. ·To return to the first caller, press (FLASH/CALL!WAIT/PLAYBACK) or (CALL!WAIT/FLASH) again. ·The call waiting service cannot be used when: --the answering system is recording someone's message, or --a parallel connected telephone is in use. ·If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your unit to display the second caller's information. After you hear a call-waiting tone while talking, the unit will display the caller's name with the phone number and "----Waiting-----". NANCY BROWN 1-000-222-3333 ----Waiting----- ·Please contact your telephone company for details and availability in your area. How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (REDIAL/PAUSE) if a pause is required for dialing with a PBX or to access a long distance service. [. . . ] This will often reduce, or eliminate, interference. Operating near 2. 4GHz electrical appliances may cause interference. Move away from the electrical appliances and/or press the CH (Channel) button. CAUTION: To comply with FCC RF exposure requirements, the base unit should be installed with its antenna located at 20 cm or more from persons and handset should be carried with the specific belt-clip provided for the handset to ensure compliance. [. . . ]