User manual PANASONIC KX-TG2584S

[. . . ] 2. 4GHz Cordless Answering System Preparation Cordless Telephone Answering System Useful Information Operating Instructions Model No. KX-TG2584S Pulse-or-tone dialing capability Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 15 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 87 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. [. . . ] To leave the conference, --For the cordless handset; press (OFF) or place the cordless handset on the charger. --For the base unit; When talking with the speakerphone, press (DIGITAL\SP-PHONE). When talking with the handset, place the handset on the cradle. The two other parties can continue the conversation. 56 Special Features (TONE) (FUNCTION/EDIT) (<), (>), (fl) (MUTE/FUNCTION) (TONE) (OFF) " Cordless Telephone (PAUSE) (MUTE) (REDIAL/PAUSE) (REDIAL) (DIGITAL\SP-PHONE) and Indicator (FLASH/CALL\WAIT/PLAYBACK) (FLASH/CALL\WAIT) Temporary Tone Dialing (For Rotary or Pulse Service Users) (Cordless\Handset) (Base\Unit) Press (TONE) before entering access numbers which require tone dialing. The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. Muting Your Conversation (Cordless\Handset) (Base\Unit) Cordless handset: Press (MUTE/FUNCTION) while talking. "<MUTE>" flashes. Base unit: Press (MUTE) while talking. "<MUTE>" flashes. The other party cannot hear your voice but you can hear theirs. To release the mute, press (MUTE/FUNCTION) on the cordless handset or (MUTE) on the base unit. For assistance, please call: 1-800-211-PANA(7262) 57 " Special Features For Call Waiting Service Users (Cordless\Handset) (Base\Unit) Press (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) if you hear a call-waiting tone while talking. The first call is put on hold and you can answer the second call. To return to the first caller, press (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) again. The call waiting service cannot be used when: --the answering system is recording someone's message, or --a parallel connected telephone is in use. If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows the unit to display the second caller's information. After you hear a call-waiting tone while talking, the unit will display the caller's name with the phone number and "----Waiting-----". BROWN, NANCY 555-666-7777 ----Waiting----- Please contact your telephone company for details and availability in your area. How to Use the PAUSE Button (For PBX Line/Long Distance Calls) (Cordless\Handset) (Base\Unit) We recommend you press (REDIAL/PAUSE) or (PAUSE) if a pause is required for dialing with a PBX or to make a long distance call. Line access number (9) (PBX) (9) ¤ (REDIAL/PAUSE) or (PAUSE) ¤ Phone number Pressing (REDIAL/PAUSE) or (PAUSE) once creates a 3. 5 second pause. This prevents misdialing when you redial or dial a stored number. Pressing (REDIAL/PAUSE) or (PAUSE) more than once increases the length of the pause between numbers. 58 " FLASH Button (Cordless\Handset) (Base\Unit) Pressing (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Pressing (FLASH/CALL\WAIT/PLAYBACK) or (FLASH/CALL\WAIT) causes to release following operations: --temporary tone dialing, --muting your conversation. Selecting the flash time (Cordless\Handset) The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms". Make sure the base unit and cordless handset are not being used. Cordless Telephone 1 2 3 4 5 6 Press (MUTE/FUNCTION). 1Save directory Ringer volume 4 3 1=Yes LCD contrast 1Program 4 3 1=Yes 1Set flash time Set line mode 4 3 1=Yes Flash time :700ms 4 3 1=Save Flash time :110ms 1=Save 4 3 Flash time :110ms Scroll to "Program" by pressing (>) or (<). Press (fl) (Yes key). Press (fl) (Yes key) at "Set flash time". The current setting is displayed. Select the desired time by pressing (>) or (<). Press (fl) (Save key). A beep sounds. To exit the programming mode, press (OFF). You can exit the programming mode any time by pressing (OFF). If the unit is connected via a PBX, PBX functions (transferring a call etc. ) might not work correctly. Consult your PBX supplier for the correct setting. For assistance, please call: 1-800-211-PANA(7262) 59 " Special Features Security Code Setting (Cordless\Handset\&\Base\Unit) If "No link to base. [. . . ] 57 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . 87 Security code setting. . . . . . . . . . . . . . . . . . . 60 Shipping product for service . . . . . . . . . . . . . . . . . . . . . . . . . Back cover Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]