User manual PANASONIC KX-TG2631

[. . . ] PQQX14929XA TG2631_2 RG3046. book Page 1 Monday, April 24, 2006 10:12 AM Operating Instructions 2. 4 GHz Digital Cordless Answering System Model No. KX-TG2631 2. 4 GHz Digital Cordless Answering System with Two Handsets Model No. KX-TG2632 Model shown is KX-TG2631. This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. [. . . ] If "Line in use" is not displayed when another phone connected to the same line is in use, you need to change the line mode to "A". *8 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first. Customer support The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer. {MENU} i "Customer support" i {Select} i {OFF} For assistance, please visit http://www. panasonic. com/phonehelp 25 PQQX14929XA TG2631_2 RG3046. book Page 26 Monday, April 24, 2006 10:12 AM Answering System Answering system Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been set (page 14). Memory capacity The total recording capacity (including your greeting message and caller messages) is about 15 minutes. A maximum of 64 messages (including a greeting message) can be recorded. L If the message memory becomes full, the ANSWER ON indicator flashes rapidly (if the answering system is turned on). L If less than 3 minutes of recording time are available, the unit announces the remaining recording time when operating the answering system. Erase unnecessary messages (page 27). Screening calls While a caller is leaving a message, you can listen to the call through the base unit's speaker. To adjust the speaker volume, press {>} or {<} repeatedly. You can answer the call by pressing {C} on the handset. Turning off the call screening feature When the base unit is not in use, press {GREETING CHECK}, then press {<} repeatedly until "0" is displayed. OR While screening, press {<} repeatedly until "0" is displayed. Note: L If you adjust the speaker volume while listening to messages or talking on the intercom, the speaker volume for call screening is turned on again. Recording your greeting message You can record your own greeting message (max. 2 minutes) that is played when the answering system answers a call. If you do not record a greeting message, a prerecorded greeting message is used. Turning the answering system on/off Press {ANSWER ON} to turn on/off the answering system. L When the answering system is turned on, the ANSWER ON indicator lights. L When the answering system is turned off, the ANSWER ON indicator turns off. 1 2 3 4 {GREETING REC} Within 10 seconds, press {GREETING REC} again. After the base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC. [. . . ] This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of the original purchase date is required for warranty service. To obtain service in the USA please contact: Panasonic Services Company, Panasonic Plus Department 20421 84th Avenue South Kent, WA 98032 Tel: 1-800-833-9626 Fax: 1-800-237-9080 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. [. . . ]