User manual PANASONIC KX-TG313SK

[. . . ] Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 40. [. . . ] € After the call has ended, the caller’s phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the handset to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be set for each handset (page 20). the default setting is “On”. Note: R Phone numbers from the 4 most recently edited area codes are automatically edited. Storing caller information to the phonebook 1 2 3 MFN CID MbN: Select the desired entry. A MMENUN MbN: “Edit & Save” a MOKN R To edit the number, press MMENUN repeatedly until the phone number is shown in the desired format. Pdf 23 2012/11/30 13:53:59 Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. Important: R Only 1 person can access the answering system (listen to messages, record a greeting message, etc. R When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been set correctly (page 12). 2 3 MbN: “Answering device” a MOKN MbN: “Answer on” or “Answer off” a MOKN a MOFFN Note for base unit and handset: R When the answering system is turned on, the ANSWER ON/OFF indicator on the base unit lights up. Call screening While a caller is leaving a message, you can listen to the call through the handset’s speaker. to adjust the speaker volume , press MDN or MCN repeatedly. Call screening can be set for pressing M each handset. the default setting is “On”. Memory capacity (including your greeting message) The total recording capacity is about 18 minutes. a maximum of 64 messages can be recorded. Note: R When message memory becomes full: – “Messages full” is shown on the handset display. € The ANSWER ON/OFF indicator on the base unit flashes rapidly if the answering system is turned on. [. . . ] Com Online Repair Request To submit a new repair and for quick repair status visit our web site at http://www. Com/help When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. [. . . ]