User manual PANASONIC KX-TG3640

[. . . ] Before initial use, see “Getting Started” on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 60. [. . . ] A MOKN Turning silent mode on/off 1 For handset setting: MMENUN#238 For base unit setting (using a handset)*1: MMENUN#*238 34 For assistance, please visit http://shop. Enter the desired hour and minute you wish to start this feature. *: Select “AM” or “PM”. A MOKN Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”. MSAVEN a MOFFN KX-TGE440 series: page 3 monitoring handset, base unit, or the phone number stored when it detects sound. Important: R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregiver’s supervision. It is the caregiver’s responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 17). 3 4 5 6 7 *1 Changing the start and end time 1 2 *1 For handset setting: MMENUN#237 For base unit setting (using a handset)*1: MMENUN#*237 Continue from step 3, “Turning silent mode on/off”, page 34. KX-TGE440 series: page 3 Selecting groups to bypass silent mode 1 2 For handset setting: MMENUN#241 For base unit setting (using a handset)*1: MMENUN#*241 MbN: Select the desired groups. A MSELECTN R “ ” is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. MSAVEN a MOFFN KX-TGE440 series: page 3 Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room). To monitor with a unit The internal baby monitor feature is available: – between handsets – between a handset and the base unit*1 *1 KX-TGE440 series: page 3 3 *1 Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or even while away from home. The monitored handset (placed in a baby’s room, for example) will automatically call the 1 2 3 MMENUN#268 MbN: “On” a MSELECTN MbN: Select the desired unit’s number to monitor with. For assistance, please visit http://shop. [. . . ] Com/support For the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 For assistance, please visit http://shop. ) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Telephone Parts One (1) Year Labor One (1) Year During the “Labor” warranty period there will be no charge for labor. [. . . ]