User manual PANASONIC KX-TG3752

[. . . ] Before initial use, see “Getting Started” on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 61. [. . . ] 3 4 5 6 7 Changing the start and end time Handset / Base unit 1 2 MMENUN#237 Continue from step 3 for the handset or step 3 for base unit, “Turning silent mode on/off”, page 35. selecting groups to bypass silent mode Handset / Base unit 1 2 MMENUN#241 MbN: Select the desired groups. A MSELECTN R “ ” is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. MSAVEN Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room). To monitor with a unit The internal baby monitor feature is available: – between handsets – between a handset and the base unit 3 36 For assistance, please visit http://shop. Pdf 36 2016/11/07 11:49:49 Programming Handset 6 MbN: Select the desired unit’s number to monitor with. Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to “On”. Handset 1 2 3 Press MMENUN on the handset being monitored. MbN: “On/Off” a MSELECTN MbN: “Off” a MSELECTN a MOFFN To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. Handset n From the phonebook: 1 MMENUN#268 Editing an outside monitoring number Handset 1 2 3 4 5 6 7 Press MMENUN on the handset being monitored. A MOKN Edit the phone number if necessary. Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. N By entering phone numbers: 1 MMENUN#268 Erasing an outside monitoring number Handset 1 2 3 4 5 6 Press MMENUN on the handset being monitored. Pdf 37 2016/11/07 11:49:49 Programming Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. handset Other programming Changing the handset name The default handset name is “Handset 1” to “Handset 6”. You can customize the name of each handset (“Bob”, “Kitchen”, etc. This is useful when you make intercom calls between handsets. [. . . ] ) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Telephone Parts One (1) Year Labor One (1) Year During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. [. . . ]