User manual PANASONIC KX-TG5110M

[. . . ] 5. 8GHz Expandable Cordless Phone System Operating Instructions Model No. Preparation Telephone System Answering System KX-TG5100M KX-TG5110M Pulse-or-tone dialing capability Model shown is KX-TG5100M. Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 75 before use. Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. [. . . ] Consult your PBX supplier for the correct settings. Base Unit 1 Press [FUNCTION/EDIT]. 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ]. M Initial setting Set tel line Set flash time Set flash time 3 Scroll to "Set tel line" by pressing [ ] or [ ], then press [ ]. 4 Scroll to "Set flash time" by pressing [ ] or [ ], then press [ ]. M 5 Select the flash time by pressing [ ] or [ ]. 6 Press [ ] (Save), then press [STOP]. M :700ms Handset : Press [CONF/FUNCTION], and follow steps 2 to 5 above, using the handset. Press the soft key ( SA VE ), then press [OFF]. 48 M Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [CONF/FUNCTION]. 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press [ ]. M Initial setting Key tone Key tone 3 Scroll to "Key tone" by pressing [ ] or [ ], then press [ ]. 4 Select "Off" or "On" by pressing [ ] or [ ]. 5 Press the soft key ( SA VE ), then press [OFF]. M Telephone System :On Incoming Call Tone Handset Base Unit During an intercom call, while using the Room Monitor feature, or while listening to messages, you can be informed by two tones if a call arrives. If you set incoming call tone to ON, this incoming call tone will be heard for as long as the line rings. To bypass the incoming call tone, set it to OFF. To set the incoming call tone to sound twice, set to "2". You can set the incoming call tone on the handset or the base unit separately. 1 Handset: Press [CONF/FUNCTION]. Base unit: Press [FUNCTION/EDIT]. 2 Scroll to "Ringer setting" by pressing [ ] or [ ], then press [ ]. 3 Scroll to "Incoming call" by pressing [ ] or [ ], then press [ ]. M Ringer setting Incoming call Incoming call 4 Select "On", "Off" or "2" by pressing [ ] or [ ]. M tone :2 M 5 Handset: Press the soft key ( SA VE ), then press [OFF]. Base unit: Press [ ] (Save), then press [STOP]. For assistance, please call: 1-800-211-PANA(7262) 49 Mailbox Features The system accommodates three voice mailboxes. You can share these mailboxes with other members of your family or office as you wish. Callers from touch tone phones can specify one of three mailboxes in which to leave a message. If callers do not specify a mailbox or call from rotary telephones, messages will be recorded into Mailbox 1. When someone calls The caller will hear a greeting message (p. ­ Callers can specify a mailbox by pressing [#][1] (Mailbox 1), [#][2] (Mailbox 2) or [#][3] (Mailbox 3) while or after hearing the greeting. They will then hear "Please leave your message", and they can start recording a message. · If you want to make callers leave messages in a specific mailbox, we recommend you record a greeting message such as: "Hello, this is (your name and/or number). If you have a message, for John press [#] and [1], for Jane press [#] and [2], for Jack press [#] and [3]. Or just stay on the line and leave a message after the beep. Thank you. " ­ Callers wait until the greeting ends, then they can leave a message. The message will be automatically recorded into Mailbox 1. [. . . ] This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. Customer Services Directory For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. [. . . ]