User manual PANASONIC KX-TG5451

[. . . ] TG5451_5452. book Page 1 Tuesday, November 16, 2004 9:03 PM Operating Instructions 5. 8 GHz Digital Cordless Answering System Model No. KX-TG5451 KX-TG5452 5. 8 GHz Digital Cordless Answering System with Dual Handsets Model shown is KX-TG5451. Model No. This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "LCD contrast" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select the desired setting. Press {Save}, then press {OFF}. Display language You can select either "English" (default) or "Español" as the display language. 1 2 3 4 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Change language" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select the desired language. L You can also select by pressing {English} or {Español}. Press {Save} or {Salvar}, then press {OFF}. 5 Note: L If you select a language you cannot read, press {MENU} {0} {8} {1} {Save} to change the display language to English. 38 For assistance, please call 1-800-211-PANA (7262). TG5451_5452. book Page 39 Tuesday, November 16, 2004 9:03 PM Programmable Settings Telephone settings Dialing mode If you cannot make calls, change this setting depending on your telephone line service. "Tone" (default): For tone dial service. "Pulse": For rotary pulse dial service. Note: L The setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call. L If the unit is connected via a PBX, certain PBX functions (call transferring, etc. ) may not work correctly. Consult your PBX supplier for the correct setting. 1 2 3 4 5 6 Line mode The line mode is preset to "B" and generally should not be adjusted. If "Line in use" on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to "A". Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Set tel line" by pressing {V} or {^}, then press {>}. Scroll to "Set dial mode" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select the desired setting. Press {Save}, then press {OFF}. 1 2 3 4 5 6 Press {MENU}. [. . . ] Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. For assistance, please call 1-800-211-PANA (7262). 69 TG5451_5452. book Page 70 Tuesday, November 16, 2004 9:03 PM Useful Information Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. [. . . ]