User manual PANASONIC KX-TG605110

[. . . ] This telephone may be used for: operating several handsets operating at several base units connecting the base unit to a PBX. Important Information Do not connect the AC adaptor to any AC outlet other than the standard AC 220240 V, 50 Hz. Outlet voltage DC 9 V, 500 mA The apparatus is approved for use with the PQLV1E power supply. This apparatus has been approved for the use of the following facilities: 1) Storage of names and telephone numbers in the phonebook for retrieval 2) Last number redial 3) Simple telephone facility 4) PBX earth register recall (option) PBX timed break register recall 5) MF signalling 6) LD signalling 7) Pause 8) Intercom 9) Call prohibition 10) Call restriction 11) Direct call 12) Intercom between handsets 13) Transferring a call from one handset to another 14) Conference 15) Setting the call waiting tone 16) Accessing the base unit 17) Caller ID service compatible 18) Answering & Recording Machine 19) Recording and playback of ICM 20) DTMF tone remote control system 21) Memo recording feature 22) Monitoring a telephone call 23) LCD call-counter: to indicate received messages 24) Vox facility: detection of caller's hanging up 25) Selecting the number of rings 27/AUTO 26) Auto disconnect 27) Total recording time (including the greeting message) is about 15 minutes 28) Security code for remote operation Any other usage will invalidate the approval of the apparatus if as a result, it then ceases to conform to the standards against which approval was granted. 2 KX-TG605110EM(E)-1(02~31) 01. 10. 22 16:14 Page 3 Method of connection This is connected to the exchange line or PABX/PMBX (Private Automatic/Manual Branch Exchange) extension by the new standard British Telecom plug and socket. Arrangements for provision of this type of termination can be made through the nearest British Telecom Sales Office. [. . . ] 15), and the unit is in the standby mode. 1 2 3 4 Press Press . or until the arrow points to . 5 6 Press or . to select "ON" or "OFF". "Setting Handset", then press Press Press or until the arrow points to . "Ringer Option", then press Press A beep sounds. The display will return to "Audible Ringer". To return to the standby mode, press or wait for 60 seconds. You can exit the programming mode any time by pressing . or until the arrow points to "Audible Ringer", then press . The current setting is at the arrow. 56 KX-TG605110EM(E)-3(50~75) 01. 10. 22 16:15 Page 57 Tone Option with the Handset Setting the Key Tone ON/OFF You can choose whether or not the handset keys will sound (key tone). 15), and the unit is in the standby mode. 1 2 Press Press . . or until the arrow points 5 6 Press "OFF". Press or . to select "ON" or to "Setting Handset", then press 3 4 Press or until the arrow points . to "Tone Option", then press If ON is selected, a beep sounds. The display will return to "Key Tone ON/OFF". To return to the standby mode, press or wait for 60 seconds. You can exit the programming mode any time by pressing . Chapter 3 While "Key Tone ON/OFF" is at the arrow, then press . Press or to select "Base Number", "Handset Number" or "OFF", then press . The display will return to "Standby Display". To return to the standby mode, press or wait for 60 seconds. Ex. 10 New Calls 25. 04 15:00 Programmable Functions on the Handset 5 You can exit the programming mode any time by pressing . 59 KX-TG605110EM(E)-3(50~75) 01. 10. 22 16:15 Page 60 Display Option with the Handset Selecting the Talk Mode Display You can select whether to display the length of the call or the dialled telephone number while in the talk mode. The factory preset is set to show the length of the call. 15), and the unit is in the standby mode. 1 2 3 4 Press Press . or until the arrow points to . During a conversation, the display will be as follows. "Talk Time" is selected. 1 hour, 30 minutes, 40 seconds. ) "Setting Handset", then press Press or until the arrow points to . "Display Option", then press Press or 01-30-40 "Phone No. " is selected. 123-456-7890) until the arrow points to "Talk Display", then press . "Talk Time": Length of the call "Phone No. ": Dialled phone number 1234567890 5 Press or to select "Talk Time" or "Phone No. ", then press . The display will return to "Talk Display". [. . . ] Advantages of DECT Excellent voice quality: Through sampling of digital signals DECT units obtain nearly noiseless transmission. High grade taping security: Based on digital transmission, DECT conversations are well protected against unapproved monitoring. Multi-Handset operation: To operate several handsets at the base unit, no cable installation is required. Interlink: Intercom conversation can be held free of charge between the registered handsets. [. . . ]