User manual PANASONIC KXTG6412CA

[. . . ] This telephone may be used for: operating several handsets operating at several base units connecting the base unit to a PBX. Important Information Do not connect the AC adaptor to any AC outlet other than the standard AC 220240 V, 50 Hz. Outlet voltage DC 9 V, 500 mA The apparatus is approved for use with the PQLV1E power supply. This apparatus has been approved for the use of the following facilities: 1) Storage of names and telephone numbers in the phonebook for retrieval 2) Last number redial 3) Simple telephone facility 4) PBX earth register recall (option) PBX timed break register recall 5) MF signalling 6) LD signalling 7) Pause 8) Intercom 9) Call prohibition 10) Call restriction 11) Direct call 12) Intercom between handsets 13) Transferring a call from one handset to another 14) Conference 15) Setting the call waiting tone 16) Accessing the base unit 17) Caller ID service compatible 18) Answering & Recording Machine 19) Recording and playback of ICM 20) DTMF tone remote control system 21) Memo recording feature 22) Monitoring a telephone call 23) LCD call-counter: to indicate received messages 24) Vox facility: detection of caller's hanging up 25) Selecting the number of rings 27/AUTO 26) Auto disconnect 27) Total recording time (including the greeting message) is about 15 minutes 28) Security code for remote operation Any other usage will invalidate the approval of the apparatus if as a result, it then ceases to conform to the standards against which approval was granted. 2 KXTG6412CAEM-1(02~23) 01. 7. 19 10:24 PM Page 3 Method of connection This is connected to the exchange line or PABX/PMBX (Private Automatic/Manual Branch Exchange) extension by the new standard British Telecom plug and socket. Arrangements for provision of this type of termination can be made through the nearest British Telecom Sales Office. [. . . ] The number stored in the direct call memory is automatically dialled. 51 KXTG6412CAEM-3(38~64) 01. 7. 19 10:42 PM Page 52 Other Option In "Other Option" menu, Changing the 4-digit handset PIN (p. 40), To set the auto talk feature ON/OFF (p. 16) are also available. Selecting the Battery Type Two Nickel Metal-hydride (Ni-MH) batteries are included with this unit. Nickel Cadmium (Ni-Cd) rechargeable batteries can also be used. If you replace the batteries with Ni-Cd batteries, you must set the battery type selection to "Ni-Cd", or the battery strength will not be displayed correctly. The factory preset is "Ni-MH". 12), and the unit is in the standby mode. 1 2 Press . 4 Press or until the arrow points . Press or until the arrow points to "Setting Handset", then press . Press or until the arrow points . to "Battery Type", then press The current battery type is at the arrow. 5 Press or to select "Ni-Cd" or . 3 "Ni-MH", then press to "Other Option", then press The display will return to the "Battery Type". To return to the standby mode, press or wait for 60 seconds. Incorrect battery type selection may shorten battery life. 52 KXTG6412CAEM-3(38~64) 01. 7. 19 10:42 PM Page 53 Reset Handset Settings This function enables the handset to clear the following setting at one time. They will return to their initial settings. Changing the PIN may prevent the unauthorised use of your unit by another person. Once you have programmed the 4-digit base unit PIN, you cannot confirm it. We recommend you to write down the 4-digit base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre. You need to enter the 4-digit base unit PIN when using the following functions. 56, 57) --Selecting Flash/Earth Mode (p. 61) --Cancelling a Handset Registration in the Base Unit (p. 63) Make sure that the power is ON (p. 12), and the unit is in the standby mode. 1 2 Press Press . or until the arrow points . 4 Enter the new 4-digit base unit PIN TWICE. Chapter 4 to "Setting Base", then press "Input Command" is displayed. Input Command 5 ---- --- A beep sounds. The display will return to "Setting Base". [. . . ] High grade taping security: Based on digital transmission, DECT conversations are well protected against unapproved monitoring. Multi-Handset operation: To operate several handsets at the base unit, no cable installation is required. Interlink: Intercom conversation can be held free of charge between the registered handsets. Functions like a PBX: More than one operation can be performed at the same time, like a PBX. [. . . ]