User manual PANASONIC KX-TG6412E

[. . . ] For more details, please visit at: www. panasonic. com/LinkToCell L If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0. 6 m to 3 m (2 feet to 10 feet) away from the base unit. 1 Base unit: Press and hold {CELL 1} or {CELL 2} until the LINK TO CELL indicator flashes red. L After the LINK TO CELL indicator starts flashing, the rest of the procedure must be completed within 5 minutes. HANDSET LOCATOR {CELL 1} CELL {CELL 2} 2 Your cellular phone: While the LINK TO CELL indicator is flashing red, follow the instructions of your cellular phone to enter the registration mode. L Depending on your cellular phone, it may ask you to enter the base unit PIN (default: "0000"). LINK TO CELL indicator 1, 2 3 Base unit: Wait until the LINK TO CELL indicator lights green to complete registration. [. . . ] The base unit is registering a cellular phone. Flashing Amber Red Flashing On Flashing Flashing rapidly A cellular call is being received. Flashing rapidly The base unit is searching for the registered cellular phone to connect. Light off -- A cellular phone is not registered to the base unit. ­3­ Link to cell Auto connection to the cellular phone The unit connects to the cellular phone at regular intervals if the connection is lost. You can set how often the base unit tries to resume the connection. The default setting is "1min". Handset: 1 {MENU} i {#}{6}{3}{2} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF} Note: L Depending on your cellular phone, it may ask you if you accept the connection requirement from the base unit. Refer to the operating instructions of your cellular phone for further operations. Disconnecting/connecting the cellular phone manually When you make or answer calls with your cellular phone, we recommend you disconnect it from the base unit, otherwise received audio may not be heard on your cellular phone. You can also manually reconnect the cellular phone to the base unit without waiting for the auto connection feature to resume the connection. Base unit: Press {CELL 1} or {CELL 2} to disconnect/connect. Storing your area code (Handset) You need to add your area code when making cellular calls to a phone number in your area. L Make sure the telephone line cord is connected properly. L If you are using a splitter to connect the unit, remove the splitter and connect the unit to the wall jack directly. If the unit operates properly, check the splitter. L Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company. L Press navigator key {^} repeatedly while talking. L Try to relocate the base unit so that distance from location to use the handset will be minimized. L If the same problem occurs even if the handset is next to the base unit, send your unit for service. L Yes, you can add up to 6 handsets (including the handset(s) sold with your own base unit) to a single base unit. L To purchase accessory handset (KX-TGA930/ KX-TGA935), please visit http://www. panasonic. com or call 1-800-332-5368. [. . . ] (cellular line) Why can I not hear a dial tone?(landline) How can I increase the handset volume level?Why is the conversation noisy or cutting off? Can I add another accessory handset to my base unit? Can I keep batteries charging all the time?How can I answer a call waiting call (2nd call)? For further information, visit http://www. panasonic. com/help or refer to operating instructions. ­7­ Quick troubleshooting Handset shows: "No link to base. [. . . ]