User manual PANASONIC KX-TG6440

[. . . ] L Do NOT use Alkaline/Manganese/Ni-Cd batteries. Rechargeable Ni-MH ONLY CHARGE FOR ABOUT 7 HOURS Confirm "Charging" is displayed. Charger L Use only the supplied Panasonic AC adaptor PQLV219. (120 V AC, 60 Hz) PNQW1485YA DM1108DM1128 TG643x_QG(e). fm Page 2 Thursday, November 27, 2008 4:57 PM Operating tips Navigator key/?(Volume) key By pressing this key ({^} or {V}) repeatedly, you can: - scroll through (up or down) various lists or items - adjust the receiver or speaker volume (up or down) while talking - move the cursor (left or right) to edit number or name Volume up {^} {V} Volume down Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. [. . . ] i {OK} i {SAVE} i {OFF} L To enter a name, see the character table in the operating instructions. Making calls Answering on/off Listening to messages {C} i {V}/{^}: Select the desired entry. i {C} Press {ANSWER ON} to turn on/off the answering system. {6} Answering system (Base unit) ­3­ TG643x_QG(e). fm Page 4 Thursday, November 27, 2008 4:57 PM Frequently asked questions Question Why is _ displayed?Cause/solution L The handset is too far from the base unit. L The base unit's AC adaptor is not properly connected. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit. L Press the navigator key {^} repeatedly while talking. L Try to relocate the base unit so that the distance to the handset is minimized. L If the same problem occurs even if the handset is next to the base unit, call Panasonic customer support at 1-800-211-PANA (1-800-211-7262). L Yes, you can add up to 6 handsets (including the handset(s) sold with your base unit) to a single base unit. L To purchase additional accessory handset(s) (KX-TGA641/KX-TGA740), please visit http://www. panasonic. com or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. L You can leave the handset on the base unit or charger anytime. L Press {CALL WAIT} when you hear the call waiting tone. How can I increase the handset volume level?Why is the conversation noisy or cutting off? Can I add another accessory handset to my base unit? Can I keep the batteries charging all the time?How can I answer a call waiting call (2nd call)? For further information, visit http://www. panasonic. com/help or refer to operating instructions. ­4­ TG643x_QG(e). fm Page 5 Thursday, November 27, 2008 4:57 PM Quick troubleshooting 1 Handset shows: "No link. Reconnect base AC adaptor. " Place the handset on the base unit, then check if "Charging" is displayed. "Charging" is not displayed. [. . . ] Your telephone may need service when only back speaker provides a dial tone. Try to connect your telephone into a different line. Try remedy for 1 on previous page. Still displayed Your telephone may need service. Please visit http://www. panasonic. com/help for further troubleshooting. ­6­ TG643x_QG(e). fm Page 7 Thursday, November 27, 2008 4:57 PM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset {MENU} i {#}{1}{3}{0} {MENU} Base unit Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds. L The next step must be completed within 90 seconds. {LOCATOR} Handset Press {OK}, then press {OFF} after a long beep sounds. Press Locator on base 4sec then press OK {OK} For further registration information, visit http://www. panasonic. com/RegisterYourHandset ­7­ TG643x_QG(e). fm Page 8 Thursday, November 27, 2008 4:57 PM IMPORTANT! If your product is not working properly . . . 1 Reconnect AC adaptor to the base unit. [. . . ]