User manual PANASONIC KXTG6592G

[. . . ] 10 Useful Telephone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Caller ID Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Multi-unit Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Useful Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Digits will be cleared from the right. 5 Press {e} or {v} to select the desired language. i {>} i {ih} 6 {>} i {ih} 8 TG1100_1102FX(e-e). book Page 9 Wednesday, February 15, 2006 11:42 AM Making/Answering Calls Making/Answering Calls Making calls 1 Dial the phone number. i {C} 2 When finished talking, press {ih} or place the handset on the base unit or charger. 2 Press {*} when prompted to enter your code or PIN, then press the appropriate dial keys. L The dialling mode will return to pulse when you hang up. Answering calls 1 Press {C} to answer the call. L You can also answer a call by pressing any dial key from {0} to {9}, {*}, {#}, or {INT}. (Any key answer feature) Redial functions (Redialling/ Storing/Editing before calling/ Erasing) 1 {R} i Press {e} or {v} to select the desired number. 2 Redialling: {C} Storing: {>} i "SAVE TEL NO" i {>} i {j/OK} i Enter the name (9 characters max. ; page 10). i {j/OK} Editing before calling: {>} i "EDIT CALL NO" i {>} i Edit the number. i {C} Erasing: {>} i "CLEAR"/"ALL CLEAR" i {>} i "YES" i {>} i {ih} 2 When finished talking, press {ih} or place the handset on the base unit or charger. Handset locator 1 Press {x} on the base unit. 2 To stop paging, press {x} on the base unit or press {C} on the handset. To adjust the receiver volume Press {e} or {v} while on a call. Key lock The handset can be locked so that no calls or settings can be made. Incoming calls can be answered, but all other functions are disabled while key lock is on. To turn key lock on, press {j/OK} for about 2 seconds. {0} {3} Feature (Default setting) Reset base unit to its default settings. *1 - Enter base unit PIN (default: "0000"). *2 i {>} Dialling mode (Tone): page 8 Flash time (600 ms)*3 - Enter base unit PIN (default: "0000"). *2 i {2} i {1} - Select the desired setting by pressing {1} for 100 ms, {2} for 600 ms or {3} for 300 ms. i {>} DTMF mode (Off): page 14 12 TG1100_1102FX(e-e). book Page 13 Wednesday, February 15, 2006 11:42 AM Useful Telephone Settings Code No. {5} Feature (Default setting) Change base unit PIN ("0000"). *4 - Enter the current 4-digit base unit PIN. *2 - Enter the new 4-digit base unit PIN. - Enter the new 4-digit base unit PIN again. Call restriction*5 Setting call restriction - Enter base unit PIN (default: "0000"). *2 i Press the desired handset numbers. i {>} - Enter the phone number to be restricted (8 digits max. ). L To select a different memory location, press {>} and enter a number. - {>} Turning on/off call restriction - Enter base unit PIN (default: "0000"). *2 L Handset number will be displayed. A flashing number indicates call restriction is on; a non-flashing number indicates call restriction is off. - Press the desired handset numbers to turn on/off. i {>} 2 times Emergency number*6 - Enter base unit PIN (default: "0000"). *2 i {*} Storing: - Enter the emergency number (8 digits max. ). [. . . ] L The redialled number was more than 24 digits long. L Clean the charge contacts and charge again (page 6). L It is time to replace the batteries (page 6). The unit does not ring. The handset will not turn on. A busy tone is heard when {C} is pressed. [. . . ]