User manual PANASONIC KXTG6611AR

[. . . ] 11 Useful Telephone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Caller ID Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Multi-unit Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Useful Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 6 {>} i {ih} 8 TG1100_1102CX(e-e). book Page 9 Tuesday, August 29, 2006 10:30 AM Making/Answering Calls Making/Answering Calls Making calls 1 Dial the phone number. i {C} 2 When finished talking, press {ih} or place the handset on the base unit or charger. Temporary tone dialling (for rotary or pulse service users) You can temporarily switch the dialling mode to tone when you need to access touch tone services (e. g. , telephone banking services). Answering calls 1 Press {C} to answer the call. L You can also answer a call by pressing any dial key from {0} to {9}, {*}, {#}, or {INT}. (Any key answer feature) 1 Make a call. 2 Press {*} when prompted to enter your code or PIN, then press the appropriate dial keys. L The dialling mode will return to pulse when you hang up. 2 When finished talking, press {ih} or place the handset on the base unit or charger. Handset locator Redial functions (Redialling/ Storing/Editing before calling/ Erasing) 1 {R} i Press {e} or {v} to select the desired number. 1 Press {x} on the base unit. 2 To stop paging, press {x} on the base unit or press {C} on the handset. 2 Redialling: {C} Storing: {>} i "SAVE TEL NO" i {>} i {j/OK} i Enter the name (9 characters max. ; page 11). i {j/OK} Editing before calling: {>} i "EDIT CALL NO" i {>} i Edit the number. i {C} Erasing: {>} i "CLEAR"/"ALL CLEAR" i {>} i "YES" i {>} i {ih} To adjust the receiver volume Press {e} or {v} while on a call. Pause button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. Press {R} repeatedly to create longer pauses. Key lock The handset can be locked so that no calls or settings can be made. Incoming calls can be answered, but all other functions are disabled while key lock is on. {0} {3} Feature (Default setting) Reset base unit to its default settings. *1 - Enter base unit PIN (default: "0000"). *2 i {>} Dialling mode (Tone): page 8 Flash time (600 ms)*3 - Enter base unit PIN (default: "0000"). *2 i {2} i {1} - Select the desired setting by pressing {1} for 100 ms, {2} for 600 ms or {3} for 300 ms. i {>} DTMF mode (Off): page 15 13 TG1100_1102CX(e-e). book Page 14 Tuesday, August 29, 2006 10:30 AM Useful Telephone Settings Code No. {5} Feature (Default setting) Change base unit PIN ("0000"). *4 - Enter the current 4-digit base unit PIN. *2 - Enter the new 4-digit base unit PIN. - Enter the new 4-digit base unit PIN again. Call restriction*5 Setting call restriction - Enter base unit PIN (default: "0000"). *2 i Press the desired handset numbers. i {>} - Enter the phone number to be restricted (8 digits max. ). L To select a different memory location, press {>} and enter a number. - {>} Turning on/off call restriction - Enter base unit PIN (default: "0000"). *2 L Handset number will be displayed. A flashing number indicates call restriction is on; a non-flashing number indicates call restriction is off. - Press the desired handset numbers to turn on/off. i {>} 2 times Emergency number*6 - Enter base unit PIN (default: "0000"). *2 i {*} Storing: - Enter the emergency number (8 digits max. ). [. . . ] L Make sure that the batteries are installed correctly (page 5). L The handset is too far from the base unit. L Place the handset and the base unit away from other electrical appliances. L Your unit is connected to a telephone line with DSL service. [. . . ]