User manual PANASONIC KX-TG6621FX

[. . . ] TG661x_662xFX(e). book Page 1 Wednesday, March 2, 2011 2:31 PM Operating Instructions Digital Cordless Phone Model No. KX-TG6611FX KX-TG6612FX KX-TG6621FX Digital Cordless Answering System Model No. Model shown is KX-TG6611. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. [. . . ] s M L If you select "Off", press {ic} to exit. Enter the desired hour and minute you wish to start this feature. s M L You can select 24-hour or 12-hour clock format ("AM" or "PM") by pressing /. Enter the desired hour and minute you wish to end this feature. s M 6 4 27 TG661x_662xFX(e). book Page 28 Wednesday, March 2, 2011 2:31 PM Programming 5 {ic} L When the night mode is set, 3 is displayed. Changing the start and end time 1 2 8(237 Continue from step 3, "Turning night mode on/off", page 27. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 32) with 7 after the call is disconnected. Setting the ring delay This setting allows the handset to ring during night mode if the caller waits long enough. After the selected amount of time passes, the handset rings. If you select "No Ringing", the handset never rings during night mode. 1 8(239 2 {r}: Select the desired setting. s M s {ic} Note: L When the answering system answers the call, this feature does not work. (KX-TG6621) Storing unwanted callers You can store up to 30 phone numbers in the call barred list. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 {<} (y) 2 {r}: Select the entry to be barred. s I 3 {r}: "Caller Barred" s M 4 {r}: "Yes" s M s {ic} By entering phone numbers: 1 8(217 s m 2 Enter the phone number (24 digits max. ). s M L To erase a digit, press ^. Changing the handset name Each handset can be given a customised name ("Bob", "Kitchen", etc. ). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. If you select "Yes" without entering any handset name, "Handset 1" to "Handset 6" is displayed. 3 {ic} 1 2 3 4 5 8(1)4 Enter the desired name (max. s M 2 times {ic} Viewing/editing/erasing bar call numbers 1 2 3 8(217 {r}: Select the desired entry. To edit a number: ~ s Edit the phone number. s M s {ic} To erase a number: W s {r}: "Yes" s M s {ic} Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. Note: L When editing, press the desired dial key to add, ^ to erase. 28 TG661x_662xFX(e). book Page 29 Wednesday, March 2, 2011 2:31 PM Programming Setting call restriction You can restrict selected handsets from dialling certain numbers. [. . . ] Confirm that SMS is turned on (page 34). L An error occurred while sending the message. L Your phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company. "FD" is displayed. "FE" is displayed. [. . . ]