User manual PANASONIC KXTG6823E

[. . . ] Change the unit's display language as needed (page 13). (For Czech and Slovakia) This cordless telephone is possible to use according to General licence No. : VO-R/8/08. 2005-23 (for Czech), VPR-7/2001 (for Slovakia). TG2511_21FX(e). book Page 2 Tuesday, February 2, 2010 3:08 PM Table of Contents Introduction Model composition . 32 Transferring calls, conference calls . 32 Important Information For your safety . [. . . ] L If there is no entry corresponding to the character you selected, the next entry is displayed. {V}/{^}: Scroll through the phonebook if necessary. {C} 3 4 3 Enter the party's name (16 characters max. ). i {j/OK} L You can change the character entry mode by pressing {T/P} (page 33). Enter the party's phone number (24 digits max. ). i {j/OK} {V}/{^}: "Save" i {j/OK} L To add other entries, repeat from step 3. {ic} Editing entries 1 Find the desired entry (page 18). i {j/OK} 4 5 6 2 3 4 5 6 {V}/{^}: "Edit" i {j/OK} Edit the name if necessary (16 characters max. ; page 33). i {j/OK} Edit the phone number if necessary (24 digits max. ). i {j/OK} {V}/{^}: "Save" i {j/OK} {ic} Finding and calling a phonebook entry Scrolling through all entries 1 2 {k/C} {V}/{^}: Select the desired entry. L You can scroll through the phonebook entry by pressing and holding {V} or {^}. {C} Erasing entries 1 Find the desired entry (page 18). i {j/OK} 2 3 {V}/{^}: "Erase" i {j/OK} {V}/{^}: "Yes" i {j/OK} i {ic} 3 1 Searching by first character {k/C} L Change the character entry mode if necessary: {T/P} i {V}/{^}: Select the character entry mode. L Do not use more than one repeater at a time. Setting the repeater mode 5 {V}/{^}: "Yes" i {j/OK} i {ic} Note: L The following items will be deleted or reset to their default settings: ­ Base unit settings (page 20) ­ Answering system settings (KX-TG2521, page 19) ­ One touch eco mode (page 14) ­ Caller list ­ Voice mail messages L The following items will be retained: ­ Date and time ­ Repeater mode ­ Recordings, including your greeting message and caller messages (KX-TG2521) ­ Call screening (KX-TG2521) L If you select the desired country in step 4, the following default settings will be changed for the selected country's default settings: ­ Recall/flash time (page 20) ­ Display language (page 20) 1 2 3 4 {j/OK} {V}/{^}: "Base Unit Setup" i {j/OK} {V}/{^}: "Repeater Mode" i {j/OK} {V}/{^}: Select the desired setting. i {j/OK} i {ic} Note: L After turning the repeater mode on or off, w flashes on the handset momentarily. This is normal and the handset can be used once w stops flashing. 22 TG2511_21FX(e). book Page 23 Tuesday, February 2, 2010 3:08 PM Caller ID Service Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/ telephone company for details. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Caller ID features When an outside call is being received, the caller's phone number is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. L If the unit cannot receive caller information, the following is displayed: ­ "Out of Area": The caller dials from an area which does not provide a Caller ID service. ­ "Private Caller": The caller requests not to send caller information. L If the unit is connected to a PBX system, caller information may not be properly received. Missed calls If a call is not answered, the unit treats it as a missed call and "Missed Call" is displayed. [. . . ] L Record your own greeting message again (page 26). L The handset is too far from the base unit. L You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 27). [. . . ]