User manual PANASONIC KX-TG7100CX

[. . . ] TG7100CX(e). book Page 1 Tuesday, May 23, 2006 9:02 AM Operating Instructions Digital Cordless Phone Model No. KX-TG7100CX This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. Charge the batteries for about 7 hours before initial use. Please read these operating instructions before using the unit and save them for future reference. TG7100CX(e). book Page 2 Tuesday, May 23, 2006 9:02 AM Introduction Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. [. . . ] You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. 1 {j/OK} i "Base Unit Setup" i {>} 2 "Call Options" i {>} 3 "Call Restrict" i {>} 4 Enter the base unit PIN (default: "0000"). 5 Set which handsets will be restricted by pressing the desired handset number. L All the registered handset numbers will be displayed. 19 TG7100CX(e). book Page 20 Tuesday, May 23, 2006 9:02 AM Caller ID Service 2 Press {V} to search from the most recent Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to Caller ID service. Consult your service provider/telephone company for details. Caller ID features When an outside call is received, the caller's phone number will be displayed. L Phone numbers of the last 50 callers will be logged in the caller list. L When caller information is received and it matches a phone number stored in the unit's phonebook, the stored name will be displayed and logged in the caller list. L If the unit is connected to a PBX system, you may not receive the caller information. L When the caller dialled from an area which does not provide Caller ID service, "Out of Area" will be displayed. L When the caller requested not to send caller information, either no information or "Private Caller" will be displayed. Missed calls If a call is not answered, the unit treats the call as a missed call. The number of missed calls is shown on the display. This lets you know if you should view the caller list to see who called while you were out. call, or press {^} to search from the oldest call. L If the item has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. 3 {C} / {s} Note: L If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically (page 19). Editing a caller's phone number before calling back 1 {j/OK} i "Caller List" i {>} 2 Press {^} or {V} to display the desired entry. 3 {j/OK} i "Edit and Call" i {>} 4 Edit the number. L Press dial key ({0} to {9}) to add, {C/T} to delete. 5 {C} / {s} Erasing caller information 1 {j/OK} i "Caller List" i {>} 2 Press {^} or {V} to display the desired entry. i {j/OK} 3 "Erase" i {>} L To erase all entries, select "Erase All". i {>} Caller list Viewing the caller list and calling back 1 {j/OK} i "Caller List" i {>} 20 4 "Yes" i {>} i {ih} TG7100CX(e). book Page 21 Tuesday, May 23, 2006 9:02 AM Caller ID Service Storing caller information into the handset phonebook 1 {j/OK} i "Caller List" i {>} 2 Press {^} or {V} to display the desired entry. i {j/OK} 3 "Add Phonebook" i {>} 4 Continue from step 3, "Adding entries to the handset phonebook", page 13. Voice mail service Voice mail is an automatic answering service offered by your service provider/telephone company. If you subscribe to this service, your service provider/telephone company's voice mail system will answer calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please consult your service provider/telephone company for details of this service. 21 TG7100CX(e). book Page 22 Tuesday, May 23, 2006 9:02 AM SMS (Short Message Service) Using SMS (Short Message Service) SMS allows you to send and receive text messages between other fixed-line and mobile phones that support compatible SMS networks and features. Important: L To use SMS features, you must: ­ subscribe to the Caller ID and/or appropriate service ­ confirm SMS is turned on ­ confirm the correct message centre numbers are stored Consult your service provider/telephone company for details and availability. [. . . ] L The SMS message centre number(s) are not stored or are incorrect. Wait until the message has been sent before using other telephone functions. L Your unit is connected to a telephone line with DSL service. We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. [. . . ]