User manual PANASONIC KX-TG7120FX

[. . . ] TG7100-7120FX(e-e). book Page 1 Thursday, August 10, 2006 10:32 AM Operating Instructions Digital Cordless Phone Model No. KX-TG7100FX KX-TG7100 KX-TG7102FX Digital Cordless Answering System Model No. KX-TG7120FX This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. [. . . ] For Slovakia: The message centre numbers (used for SMS service provided by Slovak Telecom) are preprogrammed in this unit. L Consult your service provider/telephone company for more information. 1 {j/OK} i "SMS" i {>} 2 "Settings" i {>} 3 "Message Centre1" or "Message Centre2" i {>} 4 Enter/edit the number as necessary. i {j/OK} 5 "Save" i {>} i {ih} Note: L If your phone is connected to a PBX, you need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 phone number. (For Czech and Slovakia only) For Message Centre 2, store the Message Centre 1 phone number as is, without adding a line access number or dialling pause. Turning SMS on/off 1 2 3 4 {j/OK} i "SMS" i {>} "Settings" i {>} "SMS On/Off" i {>} "On" or "Off" i {>} i {ih} Sending a message Writing and sending a new message 1 {j/OK} i "SMS" i {>} 2 "Create" i {>} 3 Enter the message (page 35). i {j/OK} Storing/changing SMS message centre numbers SMS message centre telephone numbers must be stored in order to send and receive SMS messages. 4 Enter the destination phone number (20 digits max. ). i {j/OK} 23 TG7100-7120FX(e-e). book Page 24 Thursday, August 10, 2006 10:32 AM SMS (Short Message Service) L Using the handset phonebook: {k} i Select the handset phonebook entry. i {j/OK} 2 times L Using the caller list: Press {^} or {V} to select the party. i {j/OK} 2 times L Using the redial list: Press {R} repeatedly to select the phone number. i {j/OK} 2 times "Writing and sending a new message", page 23. Editing and sending a saved message 1 {j/OK} i "SMS" i {>} 2 "Send List" i {>} 3 Press {^} or {V} to select the message. i {j/OK} 5 To save the message, select "Yes". i {>} 4 {j/OK} i "Edit Message" i {>} i Continue from step 3, "Writing and sending a new message", page 23. 6 To send the message, press {>}. L To cancel sending, press {ih}. Note: L This unit supports SMS messages of up to 612 characters, however, the maximum number of characters you can send or receive may be limited by your SMS service provider/telephone company. Consult your SMS service provider/telephone company for details. L If your message contains over 160 characters, the message is a long message and "Your service provider/telephone company may treat long messages differently from other messages. Consult your service provider/telephone company for details. L If your phone is connected to a PBX, store the PBX line access number (page 25). Erasing saved messages 1 {j/OK} i "SMS" i {>} 2 "Send List" i {>} 3 Press {^} or {V} to select the message. i {j/OK} 4 {j/OK} i "Erase" i {>} L To erase all messages, select "Erase All". i {>} 5 "Yes" i {>} i {ih} Receiving a message When an SMS message is received: ­ a tone is heard (if the handset ringer is turned on) ­ "Receiving SMS Message" is displayed ­ F is displayed ­ the message indicator on the handset flashes if the message alert feature (page 16) has been turned on Sending a saved message 1 {j/OK} i "SMS" i {>} 2 "Send List" i {>} 3 To read a saved message, press {^} or {V} to select the message. i {j/OK} 4 To send the message, press {j/OK}. i "Send" i {>} Reading a received message 1 {j/OK} i "SMS" i {>} 2 "Receive List" i {>} 5 Press and hold {C/T} to erase all numbers, then continue from step 4, 24 TG7100-7120FX(e-e). book Page 25 Thursday, August 10, 2006 10:32 AM SMS (Short Message Service) 3 Press {^} or {V} to select a message. L Messages which have already been read are indicated by a "Q", even if they were read using another handset. Storing the sender's number in the handset phonebook 1 While reading a received message, press {j/OK}. 4 Press {j/OK} to read the message content. Note: L To call the message sender, press {C} or {s}. 2 "Add Phonebook" i {>} 3 Continue from step 3, "Adding entries to the handset phonebook", page 14. Replying to a message 1 While reading a received message, press {j/OK}. Editing the sender's number before calling back 1 While reading a received message, press {j/OK}. 2 "Reply" i {>} 3 Enter a message (page 35). i {j/OK} 2 "Edit and Call" i {>} 3 Edit the number. i {C} / {s} 4 Edit the destination phone number and/or press {j/OK}. 5 Continue from step 5, "Writing and sending a new message", page 23. Editing/forwarding a message SMS settings If the base unit is reset to its default settings (page 20), the following SMS-related settings will be reset. [. . . ] 60 mm × 173 mm × 105 mm Handset: Approx. 155 mm × 48 mm × 34 mm Charger*2: Approx. 61 mm × 87 mm × 95 mm Mass (weight): Base unit*3: Approx. 90 g *1 KX-TG7120 only *2 KX-TG7102 only *3 KX-TG7100 and KX-TG7102 only Note: L Specifications are subject to change. [. . . ]