User manual PANASONIC KX-TG7200FX

[. . . ] TG7200-7220FX(e-e). book Page 1 Friday, June 29, 2007 10:24 AM Operating Instructions Digital Cordless Phone Model No. KX-TG7200FX KX-TG7202FX KX-TG7220FX Digital Cordless Answering System Model No. KX-TG7200 This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. Charge the batteries for about 7 hours before initial use. This unit is designed to be used in Czech, Slovakia, and central Europe. To use this unit in your country, first change the unit's region setting to match your country (page 20). [. . . ] Note: L A total of 47 messages (at 160 characters/message) can be saved. Total number may be more than 47 if length of messages is less than 160 characters/message. L If the unit is connected to a PBX system, you may not be able to use SMS features. Storing SMS message centre numbers SMS message centre telephone numbers must be stored in order to send and receive SMS messages. Consult your service provider/telephone company for more information. L If you change the unit's region setting/reset the base unit, the stored message centre numbers will be deleted (page 26). In this case, store the numbers again. 1 2 3 4 5 6 {j/OK} {^}/{V}: "SMS" i {>} {^}/{V}: "Settings" i {>} {^}/{V}: "Message Centre1" or "Message Centre2" i {>} Enter/edit the number as necessary. i {j/OK} {^}/{V}: "Save" i {>} i {ih} Turning SMS on/off 1 2 3 4 5 {j/OK} {^}/{V}: "SMS" i {>} {^}/{V}: "Settings" i {>} {^}/{V}: "SMS On/Off" i {>} {^}/{V}: "On" or "Off" i {>} i {ih} Note: L For PBX users: ­ You need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 phone number. ­ If you only use the Message Centre 1 phone number for SMS, store the Message Centre 1 phone number as is (without adding a line access number or dialling pause) to Message Centre 2. 23 TG7200-7220FX(e-e). book Page 24 Friday, June 29, 2007 10:24 AM SMS (Short Message Service) Sending a message Writing and sending a new message 1 {j/OK} 2 {^}/{V}: "SMS" i {>} 3 {^}/{V}: "Create" i {>} 4 Enter the message (page 36). i {j/OK} treat long messages differently from other messages. Consult your service provider/telephone company for details. L If your phone is connected to a PBX, store the PBX line access number (page 26). 5 Enter the destination phone number (20 digits max. ). i {j/OK} Using the handset phonebook: {k} i {^}/{V}: Select the handset phonebook entry. i {j/OK} 2 times Using the caller list: {^}/{V}: Select the party. i {j/OK} 2 times Using the redial list: Press {R} repeatedly to select the phone number. i {j/OK} 2 times To save the message, select "Yes". i {>} To send the message, press {>}. L To cancel sending, press {ih}. Sending a saved message 1 {j/OK} 2 {^}/{V}: "SMS" i {>} 3 {^}/{V}: "Send List" i {>} 4 To read a saved message, press {^} or {V} to select the message. i {j/OK} 5 6 7 To send the message, press {j/OK}. i {^}/{V}: "Send" i {>} Press and hold {C/T} to erase all numbers. Continue from step 5, "Writing and sending a new message", page 24. 6 7 Note: L This unit supports SMS messages of up to 612 characters, however, the maximum number of characters you can send or receive may be limited by your SMS service provider/telephone company. Consult your SMS service provider/telephone company for details. L If your message contains over 160 characters, the message is a long message and " [. . . ] Answer the call and try again later. While recording a greeting message or listening to messages, the unit rings and recording stops. For DSL users We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. 43 TG7200-7220FX(e-e). book Page 44 Friday, June 29, 2007 10:24 AM Useful Information Specifications Standard: DECT (Digital Enhanced Cordless Telecommunications), GAP (Generic Access Profile) Number of channels: 120 Duplex Channels Frequency range: 1. 88 GHz to 1. 90 GHz Duplex procedure: TDMA (Time Division Multiple Access) Channel spacing: 1, 728 kHz Bit rate: 1, 152 kbit/s Modulation: GFSK (Gaussian Frequency Shift Keying) RF transmission power: Approx. 250 mW Voice coding: ADPCM 32 kbit/s Power source: 220­240 V, 50 Hz Power consumption Base unit*1: Standby: Approx. 5. 3 W Operating conditions: 5 °C­40 °C, 20 %­80 % relative air humidity (dry) Dimensions: Base unit: Approx. 54 mm × 122 mm × 137 mm Handset: Approx. [. . . ]