User manual PANASONIC KX-TG8061FX

[. . . ] TG8051_8061FX(e-e). book Page 1 Monday, April 25, 2011 11:42 AM Operating Instructions Digital Cordless Phone Model No. KX-TG8051FX KX-TG8061FX Digital Cordless Answering System Model No. Model shown is KX-TG8051. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. [. . . ] s M L If you select "Off", press {ic} to exit. Enter the desired hour and minute you wish to start this feature. s M L You can select 24-hour or 12-hour clock format ("AM" or "PM") by pressing /. Enter the desired hour and minute you wish to end this feature. s M {ic} L When the night mode is set, f is displayed. 3 4 5 Enter the desired date and month. s M L We recommend selecting a different ringer tone from the one used for outside calls. M s {ic} L When the alarm is set, z is displayed. 4 5 Changing the start and end time 6 1 2 1 (middle soft key) y237 Continue from step 3, "Turning night mode on/off", page 30. Note: L To stop the alarm, press {ic} or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. Setting the ring delay This setting allows the handset to ring during night mode if the caller waits long enough. After the selected amount of time passes, the handset rings. If you select "No Ringing", the handset never rings during night mode. 1 1 (middle soft key) y239 2 {r}: Select the desired setting. s M s {ic} Night mode Night mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Night mode can be set for each handset. 30 TG8051_8061FX(e-e). book Page 31 Monday, April 25, 2011 11:42 AM Programming Note: L When the answering system answers the call, this feature does not work. (KX-TG8061) the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 35) with 7 after the call is disconnected. Selecting categories to bypass night mode 1 2 1 (middle soft key) y241 {r}: Select your desired categories. s t L "Q" is displayed next to the selected category numbers. L To cancel a selected category, press t again. M s {ic} Storing unwanted callers You can store up to 30 phone numbers in the call barred list. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 {3} (y) 2 {r}: Select the entry to be barred. s MsI 3 {r}: "Caller Barred" s M 4 {r}: "Yes" s M s {ic} By entering phone numbers: 1 1 (middle soft key) y217 s m 2 Enter the phone number (24 digits max. ). [. . . ] L An error occurred while sending the message. L Your phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company. "FD" is displayed. "FE" is displayed. "E0" is displayed. Answering system (KX-TG8061) Problem The unit does not record new messages. [. . . ]