User manual PANASONIC KX-TG8070FX

[. . . ] TG8070-8090FX(e-e). book Page 1 Wednesday, August 1, 2007 9:26 AM Operating Instructions Digital Cordless Phone Model No. KX-TG8070FX KX-TG8072FX KX-TG8090FX Digital Cordless Answering System Model No. KX-TG8070 This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. Charge the batteries for about 8 hours before initial use. (For Czech and Slovakia) This cordless telephone is possible to use according to General licence No. : VO-R/8/08. 2005-23 (for Czech), VPR-7/2001 (for Slovakia). Please read these operating instructions before using the unit and save them for future reference. TG8070-8090FX(e-e). book Page 2 Wednesday, August 1, 2007 9:26 AM Table of Contents Preparation Introduction . [. . . ] "New Calls" and x are shown on the display. This lets you know if you should view the caller list to see who called while you were out. "New Calls" and x remain until you view all missed calls. Editing a caller's phone number before calling back 1 {^} 2 {^}/{V}: Select the desired entry. i {OK} 3 Edit the number. L Press {<} or {>} to move the cursor. Press dial key ({0} to {9}) to add, {DEL} to delete. 4 {C} Erasing caller information 1 {^} 2 {^}/{V}: Select the desired entry. i {MENU} 3 {^}/{V}: "Erase" or "Erase All" i {OK} 4 {YES} i {i} Storing caller information into the handset phonebook 1 {^} 2 {^}/{V}: Select the desired entry. i {MENU} 3 {^}/{V}: "Add Phonebook" i {OK} 4 Enter the party's name (15 characters max. ; page 30). i {OK} i {i} Caller list Viewing the caller list and calling back 1 {^} 2 Press {V} to search from the most recent call, or press {^} to search from the oldest call. L If the item has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. 3 {C} 19 TG8070-8090FX(e-e). book Page 20 Wednesday, August 1, 2007 9:26 AM h SMS (Short Message Service) 4 Using SMS SMS allows you to send and receive text messages between other fixed-line and mobile phones that support compatible SMS networks and features. Important: L To use SMS features, you must: ­ subscribe to Caller ID and/or appropriate service ­ confirm SMS is turned on ­ confirm the correct message centre numbers are stored Consult your service provider/telephone company for details and availability. Note: L A total of 20 messages can be saved in "Incoming" and "Outgoing" combined. {^}/{V}: Select the desired centre number location (1-4). i {OK} Add or edit the number as necessary. i {OK} i {i} 5 Note: L For PBX users: ­ You need to add the PBX line access number and a dialling pause to the beginning of the Message Centre phone number used for sending. You do not need to add a dialling pause if the PBX access number is only 1 digit. ­ If you only use the Message Centre 1 phone number for SMS, store the Message Centre 1 phone number as is (without adding a line access number or dialling pause) to Message Centre 2. Selecting an SMS centre number for sending a message If several SMS message centre numbers are stored, you can select the desired number to be used for sending messages. The default setting is "SMS-Centre 1". Turning SMS on/off The default setting is "Off". 1 2 3 4 {MENU} (right soft key) i h i {OK} {^}/{V}: "Settings" i {OK} {^}/{V}: "SMS On/Off" i {OK} {^}/{V}: "On" or "Off" i {OK} i {i} 1 2 3 4 {MENU} (right soft key) i h i {OK} {^}/{V}: "Settings" i {OK} {^}/{V}: "Select Send SMSC" i {OK} {^}/{V}: Select the desired centre number location. i {OK} i {i} Note: L If you set SMS "On" (page 20), the 1st ring does not sound when you receive a call. Storing SMS message centre numbers SMS message centre telephone numbers must be stored in order to send and receive SMS messages. You can store up to 4 numbers and select the desired message centre number in advance (page 20) for sending a message. Consult your service provider/telephone company for more information. 1 2 3 20 {MENU} (right soft key) i h i {OK} {^}/{V}: "Settings" i {OK} {^}/{V}: "SMS-Centre" i {OK} TG8070-8090FX(e-e). book Page 21 Wednesday, August 1, 2007 9:26 AM h SMS (Short Message Service) Sending a message Writing and sending a new message 1 {MENU} (right soft key) i h i {OK} 2 {^}/{V}: "Create" i {OK} L You can use the same text you created last time if you were interrupted (by an incoming call or pressing {i}) and could not send/save the message. 2 3 4 {^}/{V}: "Outgoing" i {OK} {^}/{V}: Select a message. i {READ} To send the message, press {MENU}. i {^}/{V}: "Send" i {OK} 3 Enter the message (page 30). i {OK} L While entering messages, the remaining number of characters that can be entered is displayed on the bottom of the handset display. [. . . ] L The handset is too far from the base unit. L You are entering the wrong remote access code. If you forget the remote access code, store a new remote access code (page 25). Follow the steps in "When the answering system is off", page 25. [. . . ]