User manual PANASONIC KXTG8090FR

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID services (CWID). Attach your purchase receipt here. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. [. . . ] · While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/ TRANSFER indicator light flashes and the SP-PHONE indicator lights. Answering System To monitor with Base Unit The handset to be monitored must not be in use and off the base unit. 1 Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE]. · The LOCATOR/INTERCOM/TRANSFER indicator flashes. 2 To call the handset, press its extension number [1] ( ) to [4] ( ). 3 To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or [SP-PHONE]. · The indicator light goes out. · If the Room Monitor feature of the destination handset is off or the handset is on the base unit, busy tones will sound. Useful Information 55 For assistance, please call: 1-800-211-PANA(7262) TG5240. fm Page 56 Wednesday, September 22, 2004 3:45 PM Special Features Muting Your Conversation During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Handset Press the soft key ( MUTE ). · "Mute" will be displayed for a few seconds and " MUTE " will flash. · To release the mute, press the soft key ( MUTE ) again. · If you press [C] or [s] to switch between the receiver and speaker, the mute will be released. Base Unit Press [MUTE]. · The SP-PHONE indicator flashes. · To release the mute, press [MUTE] again. Call Privacy Handset Call Privacy allows you to prevent other users from joining your conversation with an outside caller. To allow other users to join your conversation, leave this feature off. This feature is only available for the handset. To turn on the Call Privacy feature: Press the soft key ( PRIVACY ) during a conversation. · "PRIVACY" will be displayed. · To turn this feature off, press the soft key ( PRIVACY ) again during a conversation. · While the Call Privacy feature is turned on, other users cannot join the conversation. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. If this feature is turned off, no tones will be heard. Using the handset, this feature can be set separately for the handset and base unit. Preparation Handset incoming call tone Handset 1 Press [MENU]. 2 Press the soft key ( SELECT ) at "Ringer setting". Telephone System Ringer setting Incoming call. Incoming call 3 Scroll to "Incoming call. " by pressing [d] or [B], then press the soft key ( SELECT ). 4 Select "On", "Off" or "2" by pressing [d] or [B]. tone :2 5 Press the soft key ( SAVE ), then press [OFF]. Answering System Base unit incoming call tone Handset 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting Set base unit Incoming call. Incoming call 3 Scroll to "Set base unit" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Scroll to "Incoming call. " by pressing [d] or [B], then press the soft key ( SELECT ). Useful Information 5 Select "On", "Off" or "2" by pressing [d] or [B]. tone :2 6 Press the soft key ( SAVE ), then press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 59 TG5240. fm Page 60 Wednesday, September 22, 2004 3:45 PM Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting Key tone Key tone 3 Scroll to "Key tone" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Select "Off" or "On" by pressing [d] or [B]. :On 5 Press the soft key ( SAVE ), then press [OFF]. 60 TG5240. fm Page 61 Wednesday, September 22, 2004 3:45 PM Mailbox Features The Answering System provides three voice mailboxes. You can share these mailboxes with other members of your family or office as you wish. Callers from touch tone phones can specify a mailbox in which to leave a message. [. . . ] · Routine care -- wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, unplug the AC adaptor from the outlet. · If there is any trouble -- disconnect the unit from the telephone line and connect a known working phone. [. . . ]