User manual PANASONIC KXTG8092FR

[. . . ] L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1. L Make sure that the AC adaptor and telephone line cords are plugged into the unit properly. L The AC adaptor must remain connected at all times. [. . . ] (It is normal for the adaptor to feel warm during use. ) Printed in Malaysia PQQW13512ZA DA1104PM0 TG5421_5422_5423_QG(e). fm Page 2 Tuesday, November 16, 2004 2:29 PM Battery installation 1 Insert the battery (1), and press it down until it snaps into the compartment (2). 2 Close the handset cover. 2 1 Battery charge Place the handset on the base unit or charger for 6 hours before initial use. Base unit Charger unit (KX-TG5422 and KX-TG5423) OR CHARGE indicator CHARGE indicator Navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display, by pressing {^}, {V}, {<}, or {>}. Soft keys The handset features 2 soft keys. By pressing a soft key, you can select the function displayed directly above it. 5 Rcvd Kcalls Phone book L ­2­ TG5421_5422_5423_QG(e). fm Page 3 Tuesday, November 16, 2004 2:29 PM Basic operation Feature To make a call To turn on the speakerphone To hang up To adjust the receiver or speaker volume To redial the last number dialed To make a call using the redial list To answer a call To put an outside call on hold Operation Press {C}, then dial the phone number. While using the receiver or speaker, press {V} or {^} repeatedly. Scroll to the desired number by pressing {V} or {^}. KXTG8092FR: Press {HOLD} during an outside call. KX-TG5422 and KX-TG5423: Press {HOLD} 2 times during an outside call. Voice Mail service Voice Mail is an automatic answering service offered by your telephone company. If you subscribe to this service, your telephone company's Voice Mail system can answer calls for you when you are unavailable to answer the phone or when your line is busy. Press {V} to search from the most recent call, or press {^} to search from the oldest call. L The caller's name and phone number are displayed alternately. Example: Displayed symbols L If the same caller calls more than once, it will be displayed with the number ("×2" to "×9"). Only the date and time of the most recent call will be stored. L A Q is displayed next to items which have already been viewed or answered on this handset. SMITH, JACK 3:10P JUN. 29 1-555-333-4444 3:10P JUN. 29 L To exit the caller list, press {OFF}. 3 Press {C} or {s}. ­4­ TG5421_5422_5423_QG(e). fm Page 5 Tuesday, November 16, 2004 2:29 PM Programming via direct commands You can program most features using "direct commands"--special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit's menus. 1 2 3 4 5 Press {MENU}. Enter the desired feature code (shown below). [. . . ] Enter the desired feature code (shown below). Enter the desired setting code (shown below). Press {OFF} to exit programming mode. Direct commands chart Feature Ringer volume Ringer tone Voice enhancer LCD contrast Auto talk Set dial mode Change language Message alert Feature code {1} {1} {1} {2} {5} {0} {1} {0} {3} {0} {5} {1} {0} {8} {0} {#} Setting code {1}: Low {2}: Medium {3}: High {0}: Off {1}­{3}: Tone pattern 1­3 {4}­{7}: Melody pattern 1­4 {1}: On {0}: Off {1}­{6}: Level 1­6 {1}: On {0}: Off {1}: Pulse {2}: Tone {1}: English {2}: Spanish {1}: On {0}: Off Important information about subscription services In order to use Caller ID, Call Waiting, Call Waiting Caller ID (CWID), or Voice Mail, you must first contact your telephone company and subscribe to the desired service. [. . . ]