User manual PANASONIC KX-TG8202FX

[. . . ] TG8200_8220FX(e-e). book Page 1 Monday, August 6, 2007 5:25 PM Operating Instructions Digital Cordless Phone Model No. KX-TG8200FX KX-TG8202FX KX-TG8220FX Digital Cordless Answering System Model No. KX-TG8200 This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. Charge the batteries for about 7 hours before initial use. This unit is designed to be used in Czech, Slovakia, and central Europe. To use this unit in your country, first change the unit's region setting to match your country (page 26). [. . . ] i# 1 2 3 4 " (centre of joystick) i | i # {^}/{V}: "Call Options" i # {^}/{V}: "Call Restrict" i # Enter the base unit PIN (default: "0000"). L If you forget your PIN, consult your nearest Panasonic service centre. Set which handsets will be restricted by pressing the desired handset number. L All the registered handset numbers will be displayed. L Flashing numbers indicate call restriction is turned on for the corresponding handset. L To turn call restriction off for a handset, press the number again. i# Enter the phone number or area code to be restricted (8 digits max. ). i # i {ih} countries except Czech and Slovakia Czech Slovakia 5 {^}/{V}: "Yes" i # i {ih} 5 6 7 8 Note: L The following items will be deleted or reset to their default settings: ­ Settings listed on page 25, 33, 38 ­ All SMS messages ­ Caller list L The following items will be retained: ­ Date and time ­ Repeater mode ­ Recordings, including your greeting message, caller messages, and recorded conversations (KX-TG8220) L If you select the desired country in step 4, the following default settings will be changed for the selected country's default settings: ­ Language (page 21) ­ Language used for answering system announcements (KX-TG8220) L According to your country selection in step 4, the answering system 26 TG8200_8220FX(e-e). book Page 27 Monday, August 6, 2007 5:25 PM | Base Unit Settings announcement language changes as follows: - English Czech Slovakia L After changing the unit's region setting/resetting the base unit, w will flash on the handset momentarily. The handset can be used once w stops flashing. 27 TG8200_8220FX(e-e). book Page 28 Monday, August 6, 2007 5:25 PM j Caller ID Service Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to Caller ID service. Consult your service provider/telephone company for details. Caller ID features When an outside call is received, the caller's phone number will be displayed. L Phone numbers of the last 50 callers will be logged in the caller list. L While listening to a message recorded by the answering system using the handset, you can call back the caller without having to dial the phone number (KX-TG8220; page 37). L When caller information is received and it matches a phone number stored in the unit's phonebook: ­ The stored name will be displayed and logged in the caller list. ­ The handset will use the display colour and ringtone assigned to the caller's category. L If the unit is connected to a PBX system, you may not receive the caller information. L When the caller dialled from an area which does not provide Caller ID service, "Out of Area" will be displayed. L When the caller requested not to send caller information, either no information or "Private Caller" will be displayed. Missed calls If a call is not answered, the unit treats the call as a missed call. y and the number of missed calls are shown on the display. This lets you know if you should view the caller list to see who called while you were out. Category features for handset phonebook Categories can help you identify who is calling by using different ringtones and display colours for different categories of callers. [. . . ] L The recording time is set to "Greeting Only". Select "1 Minute" or "3 Minutes" (page 39). L If you subscribe to the voice mail service, messages are recorded by your service provider/telephone company not your telephone. Change the unit's "Number of Rings" setting or consult your service provider/telephone company (page 39). [. . . ]