User manual PANASONIC KX-TG8322UA

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L In the event of problems, you should contact your equipment supplier in the first instance. Trademarks: L Eatoni and LetterWise are trademarks of Eatoni Ergonomics, Inc. 2 TCD300CX(e). book Page 3 Monday, January 31, 2005 1:49 PM Feature highlights Feature highlights Colour display The handset's colour display allows you to customise the handset to your liking. You can customise the handset by selecting the "wallpaper" pattern shown on the display in standby mode (page 22). If you set the wallpaper to "Off", the display colour (page 22) setting will be used instead. [. . . ] Turning keytones on/off Keytones are tones heard when keys are pressed. Includes confirmation tones and error tones. 1 Press $ (middle soft key). 3 Select "Other Options", then press , . 4 Select "Keytones", then press , . 5 Select "On" or "Off", then press , . 6 Press {ih}. 24 TCD300CX(e). book Page 25 Monday, January 31, 2005 1:49 PM Base Unit Settings Guide to base unit settings For your reference, a chart of all items which can be customised for the base unit is printed below. L When customising the base unit, the current item or setting is highlighted. Base unit settings menu Ringer Setup Sub-menu Ringer Volume Night Mode Start/End On/Off Ring Delay Call Options Dial Mode Recall Pause Length Emergency No. ARS Settings Call Restrict Other Options Base Unit PIN Repeater Mode Reset Base 0000 Off -- Area Code Sub-menu 2 Default setting Medium 23:00/06:00 Off 60 sec. -- -- -- Page page 26 page 26 page 26 page 26 page 27 page 27 page 27 page 27 page 28 page 28 page 29 page 40 page 29 Note: L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the current page, scroll up or down by pressing the navigator key, {e} or {v}, respectively. 25 TCD300CX(e). book Page 26 Monday, January 31, 2005 1:49 PM Base Unit Settings Ringer setup Ringer volume 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 29). 7 Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each. Changing the flash time Change the flash time, if necessary, depending on the requirements of your service provider or PBX. 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 29). 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 29). 4 Select "Call Options", then press , . 5 Select "Emergency No. ", then press , . 6 Select a memory location, then press , . 27 TCD300CX(e). book Page 28 Monday, January 31, 2005 1:49 PM Base Unit Settings L If the memory location already contains an emergency number, the number is displayed. select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. 7 Enter/edit the number, then press , . L To erase an emergency number, press and hold {C/T}. 8 Press {ih}. Selecting area codes to be deleted automatically In some situations, phone numbers stored automatically in the Caller ID list (page 31) will include area codes. If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically. Example: You have stored the area code "123". If you make a call from the Caller ID list to the phone number "123-456-7890", the unit dials "456-7890". 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 29). 4 Select "Call Options", then press , . 5 Select "Call Restrict", then press , . 6 Set which handsets will be restricted by pressing the desired handset number. L All the registered handset numbers will be displayed. [. . . ] L The maximum number of handsets (6) are already registered to the base unit. Cancel unused handset registrations from the base unit (page 39). If you forget your PIN, consult your nearest Panasonic service centre. L Locate the handset and the base unit away from other electrical appliances. 48 TCD300CX(e). book Page 49 Monday, January 31, 2005 1:49 PM Useful Information SMS (Short Message Service) Problem I cannot send or receive SMS messages. [. . . ]