User manual PANASONIC KX-TG8412UA

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. L In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. [. . . ] The number will stop flashing. 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it. 4 Select "Other Options", then press , . 5 Select "Base Unit PIN", then press , . 6 Enter the new 4-digit base unit PIN, then press , . 7 Press {ih}. Resetting the base unit to its default settings 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 34). 7 Press , . 8 Select a memory location, then press , . L If the memory location already contains a restricted number, the number is displayed. 9 Enter the phone number or area code to be restricted (8 digits max. ), then press , . L To erase a restricted number, press {C/T}. 4 Select "Other Options", then press , . 10 Press {ih}. 5 Select "Reset Base", then press , . Other options Changing the base unit PIN (Personal Identification Number) For security, the base unit PIN must be entered when changing certain settings. The default PIN is "0000". 6 Select "Yes", then press , . 7 Press {ih}. Note: L The following items will be deleted or reset to their default settings: ­ Settings listed on page 31, 43, 52 ­ All SMS messages ­ Private mailbox settings for SMS ­ Caller list L The following items will be retained: 34 Helpline Tel. 01289 8333 TCD320E(e). book Page 35 Friday, January 7, 2005 10:01 AM Base Unit Settings ­ ­ ­ ­ Date and time Shared phonebook entries Repeater mode Recordings, including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations Helpline Tel. 01289 8333 35 TCD320E(e). book Page 36 Friday, January 7, 2005 10:01 AM Caller ID Service Using Caller ID service Important: L This unit is Caller ID compatible. Ringtone". 1 Press U (left soft key), then press $. 2 Select "Category", then press , . 4 Select the current setting of the category ringtone, then press , . 5 Select the desired ringtone, then press , . 6 Press {ih}. Changing category display colours You can select a display colour for each category. If you select "Display Colour", 36 Helpline Tel. 01289 8333 TCD320E(e). book Page 37 Friday, January 7, 2005 10:01 AM Caller ID Service the unit will use the display colour you set on page 28 when calls from this category are received. The default setting is "Display Colour". L If the item has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. L To erase the item, press w, select "Yes", then press , . 1 Press U (left soft key), then press $. 2 Select "Category", then press , . 4 Select the current setting of the category colour, then press , . 4 Press {C} or {s} to call back the displayed party. 5 Select the desired colour, then press , . Editing a caller's phone number before calling back 1 Press $ (middle soft key). 3 Press {e} or {v} repeatedly to display the desired entry. 6 Press {ih}. Audible call for shared phonebook Audible call allows you to know who is calling without looking at the display. If you record an audible call announcement for a shared phonebook entry (page 22), the audible call recording will be announced when you receive a call from that person. [. . . ] 9. 2 W I Operating conditions: 5 °C­40 °C, 20 %­80 % relative air humidity (dry) I Dimensions: Base unit: Approx. 111 mm × 121 mm × 123 mm Handset: Approx. 148 mm × 48 mm × 32 mm I Mass (weight): Base unit: Approx. 130 g Note: L Specifications are subject to change. [. . . ]