User manual PANASONIC KX-TG8563E

[. . . ] Before initial use, see "Getting Started" on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Please access our online customer survey: http://panasonic. [. . . ] Erasing all entries (middle soft key) a a MbN: "Erase All" a MbN: "Yes" a MbN: "Yes" a M N a 8 Note: or place the R To stop the alarm, press handset on the base unit or charger. R When the handset is in use, the alarm will not sound until the handset is in standby mode. Viewing entries 1 2 (middle soft key) a a Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby's room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound. Important: R You should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. Check the connection if you are diverting the baby monitor to an outside line. To see the entries on the selected date, . About the schedule by pressing Editing an entry 1 2 3 4 5 34 (middle soft key) a a MbN: "Edit" a Edit the date if necessary. Pdf 34 2012/04/20 14:29:12 Programming Note: R Both the monitored and monitoring handsets must select the same base unit in order to use the baby monitor feature (page 37). R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings during the monitoring mode. But if the monitored handset is on the base unit, the base unit ringer sounds. Turn off the base unit ringer volume to not sound the ringer (page 28). 4 To select the shared phonebook item: To select the personal phonebook item: a 5 6 MbN: Select the phonebook entry. A Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby's room). a R "Baby Monitor" will be displayed. Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. N By entering phone numbers: 1 (middle soft key) #268 To monitor with a handset The internal baby monitor feature is only available between handsets in the same radio cell. 2 3 4 5 MbN: "On" a MbN: Select "External" to monitor a from an outside line. A Enter the desired number (24 digits 2 times max. [. . . ] I cannot operate the answering system remotely. Pdf 60 2012/04/20 14:29:13 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. [. . . ]