User manual PANASONIC KX-TG9120E

[. . . ] TG9120_40_50E(e). book Page 1 Wednesday, August 2, 2006 4:54 PM Operating Instructions Digital Cordless Answering System Model No. KX-TG9120 KX-TG9120E KX-TG9140E KX-TG9150E This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider/telephone company. Charge the batteries for about 7 hours before initial use. Please read these operating instructions before using the unit and save them for future reference. TG9120_40_50E(e). book Page 2 Wednesday, August 2, 2006 4:54 PM Introduction Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. [. . . ] If you select "No Ringing", the base unit will never ring during night mode. 1 J (centre of joystick) i L i L Night mode Night mode allows you to select a block of time during which the base unit will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 30) and the base unit. Set the date and time beforehand (page 16). Setting the start and end time for night mode 2 3 4 5 "Ringer Setup" i L "Night Mode" i L "Ring Delay" i L Select the desired setting. i L i {ih} Note: L When the answering system answers the call, this feature does not work. Call options Changing the recall time Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX. 1 J (centre of joystick) i L i L 2 3 4 5 "Ringer Setup" i L "Night Mode" i L "Start/End" i L Enter the desired hour and minute you wish to start this feature. wish to end this feature. 6 Enter the desired hour and minute you 7 L i {ih} Turning night mode on/off 1 2 3 4 J (centre of joystick) i L i L "Call Options" i L "Recall/Flash" i L Select the desired setting. i L i {ih} 1 J (centre of joystick) i L i L 2 "Ringer Setup" i L 3 "Night Mode" i L 4 "On/Off" i L Helpline Tel. 01289 8333 35 TG9120_40_50E(e). book Page 36 Wednesday, August 2, 2006 4:54 PM L Base Unit Settings Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. Important: L Emergency numbers ("999", "112") cannot be restricted. Other options Changing the base unit PIN (Personal Identification Number) Important: L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 2 3 4 J (centre of joystick) i L i L "Call Options" i L "Call Restrict" i L Enter the base unit PIN (default: "0000"). L Restricted handsets have a "Q" next to them. L To turn call restriction off for a handset, select the restricted handset, then press t. 1 2 3 4 J (centre of joystick) i L i L "Other Options" i L "Base Unit PIN" i L Enter the current 4-digit base unit PIN (default: "0000"). L i {ih} 5 Set which handsets will be restricted by 5 Enter the new 4-digit base unit PIN. i L 8 Enter the phone number or area code to be restricted (8 digits max. ). i L i {ih} L To erase a restricted number, press {C/T}. 36 Helpline Tel. 01289 8333 TG9120_40_50E(e). book Page 37 Wednesday, August 2, 2006 4:54 PM j Caller ID Service Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to Caller ID service. Consult your service provider/telephone company for details. [. . . ] The appliance shall have been purchased and used solely within either the UK or ROI and in accordance with standard operating instructions and the technical and/or Safety Standards required in the UK. The appliance should be returned together with this guarantee and proof of date of purchase promptly on being found defective at the purchaser's risk and expense to the authorised dealer from whom the appliance was purchased or to the nearest authorised dealer. All enquires must be through such dealers. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused through installation, adaption, modification or use in an improper manner or inconsistent with the technical and/or safety standards required in the country where this appliance is used, or to damage occurred during transit to or from the purchaser. [. . . ]