User manual PANASONIC KX-TG9140E

[. . . ] TGA914E_for_TG9140E(e). book Page 1 Friday, July 28, 2006 11:55 AM Operating Instructions for Cordless Camera Model No. KX-TGA914E Indoor Use Only Cordless Camera Please read these Operating Instructions before using the unit and save for future reference. TGA914E_for_TG9140E(e). book Page 2 Friday, July 28, 2006 11:55 AM Table of Contents Introduction Feature highlight . 7 Symbols used in these operating instructions . 9 Camera Monitoring Camera monitoring using a handset . 10 Useful Information Cancelling the cordless camera . [. . . ] L While monitoring a cordless camera, other users cannot make an intercom call or transfer a call. L The monitoring connection is automatically cancelled after 10 minutes. L While monitoring you cannot place the handset on the base unit or charger. The monitoring connection will be cancelled. L The cordless camera may not page handsets in the following conditions: ­ when other users are on an intercom or conference call. ­ when electrical interference is emitted from electrical devices. {INT} Select the desired cordless camera. i P/{C}/{s} Speak to the cordless camera user if necessary. OR To mute your sound output, press {C/T} if necessary. When you finish monitoring, press {ih} or place the handset on the base unit or charger. 3 4 Adjusting receiver/speaker volume Push the joystick up or down while monitoring. Talking to the paged party using the cordless camera When the cordless camera is paged from a handset, the cordless camera does not ring and the speakerphone is turned on. Speak clearly into the MIC. 10 Helpline Tel. 01289 8333 TGA914E_for_TG9140E(e). book Page 11 Friday, July 28, 2006 11:55 AM Camera Monitoring Handset display item for camera monitoring Displayed Meaning item Example: 8 The handset is connected to the cordless camera. When flashing: The cordless camera is paging the handset. (It detects sound or its call button is pressed. ) Press {s} to answer the page. L You can monitor the room where the camera is located. 3 4 Handset: To mute your sound output, press {C/T} if necessary. Handset: When you finish monitoring, press {ih} or place the handset on the base unit or charger. Paging the handsets from the cordless camera The cordless camera can page handsets when it detects sound or by pressing its call button. Then the answering handset user can monitor live images from the cordless camera. Important: L Only registered handsets can be paged from the cordless camera. L If a handset is paged by the cordless camera during a call, 2 tones sound and z flashes on the handset. To monitor the cordless camera from the handset, press {ih}, then press {s}. L Auto intercom feature cannot be used when paged by a cordless camera. Paging using the camera audio sensor Important: L To use the audio detection feature of the cordless camera, turn the audio detection sensitivity to on (page 12). Paging using the cordless camera call button 1 Cordless camera: Press the call button. [. . . ] L If you set the audio detection sensitivity to off, the camera sensor does not respond. L While a handset is monitoring the cordless camera, the cordless camera stops detecting sound. L While the image of the cordless camera is being monitored by a handset, the call button will not have response. The cordless camera's indicator is flashing red. The image is faint. The image sent from the cordless camera is poor on the handset display. The image sent from the cordless camera is dark and difficult to see on the handset display. [. . . ]