User manual PANASONIC KX-TG9140EX

[. . . ] Please read these Operating Instructions before using the unit and save for future reference. 6 Symbols used in these operating instructions . Camera monitoring using the handset Important: L In these operating instructions, the term "handset" is used to refer to the KX-TGA910EX. You can monitor the room where the cordless camera is located when: ­ you access the cordless camera using the handset (page 10). [. . . ] the monitoring connection will be cancelled. L The cordless camera may not page handsets in the following conditions: ­ when other users are on an intercom or conference call. ­ when electrical interference is emitted from electrical devices. When you finish monitoring, press {ih} or place the handset on the base unit or charger. Talking to the paged party using the cordless camera When the cordless camera is paged from a handset, the cordless camera does not ring and the speakerphone is turned on. (It detects sound or its call button is pressed. L You can monitor the room where the camera is located. Handset: When you finish monitoring, press {ih} or place the handset on the base unit or charger. The cordless camera can page handsets when it detects sound or by pressing its call button. Then the answering handset user can monitor live images from the cordless camera. Important: L Only registered handsets can be paged from the cordless camera. L If a handset is paged by the cordless camera during a call, 2 tones sound and z flashes on the handset. To monitor the cordless camera from the handset, press {ih}, then press {s}. L Auto intercom feature cannot be used when paged by a cordless camera. Paging using the camera audio sensor Important: L To use the audio detection feature of the cordless camera, turn the audio detection sensitivity to on (page 12). Paging using the cordless camera call button L You can monitor the room where the cordless camera is located. Cordless camera: When the handset user answers, speak clearly into the MIC. When you finish monitoring, press {ih} or place the handset on the base unit or charger. setting the audio detection sensitivity The cordless camera features a sensor that detects human voices such as a baby cry. Sounds other than human voices may be difficult to detect. To use this feature, confirm that the cordless camera is located in a place where it can easily detect voices. Once the sensor has detected sound, the cordless camera pages the handset. [. . . ] Mount the cordless camera (A), then slide it down (B) and to the right (C) until it is secure. Upside down mounting L The image may be seen upside down when mounting upside down. To compensate for this, change the cordless camera setting to display images upside down (page 8). Drive the screws (not included) into the wall at a recommended height of 1. [. . . ]