User manual PANASONIC KX-TG9391

[. . . ] Refer to the operating instructions for connections. PNQW1340ZA DM0708SY0 TG9391_QG(e). fm Page 2 Thursday, July 3, 2008 9:25 AM Setting up Handset L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T) when installing the batteries. Rechargeable Ni-MH ONLY CHARGE FOR ABOUT 7 HOURS Confirm "Charging" is displayed. Charger L Use only the supplied Panasonic AC adaptor PQLV209 or PQLV219. [. . . ] Handset: {C} To adjust the ringer volume 1 2 3 4 {MENU} i {#}{1}{6}{0} {V}/{^}: Select the desired line. i {SELECT} {V}/{^}: Select the desired volume. i {SAVE} Proceed with the operation for your unit. Base unit: {} Handset: {OFF} ­3­ TG9391_QG(e). fm Page 4 Thursday, July 3, 2008 9:25 AM Basic operations Phonebook (Base unit/Handset) Adding entries 1 Proceed with the operation for your unit. Base unit: {C} Handset: {MENU} i {#}{2}{8}{0} Proceed with the operation for your unit. Base unit: {} Handset: {OFF} L To enter a name, see the character table in the operating instructions. Making calls 2 3 4 5 6 {ADD} Enter the party's name (16 characters max. ). i {OK} Enter the party's phone number (24 digits max. ). i {OK} {V}/{^}: Select the desired group. i {SELECT} 2 times 1 Proceed with the operation for your unit. Base unit: {C} Handset: {MENU} i {#}{2}{8}{0} 2 {V}/{^}: Select the desired entry. 3 Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C} Answering system (Base unit) Answering on Press {ANSWER SELECT} repeatedly to select the desired line(s). i {ANSWER ON} L The ANSWER ON indicator lights up. {ANSWER ON} L The ANSWER ON indicator turns off. {6} Answering off Listening to messages Frequently asked questions Question How can I increase the handset volume level?Why is the conversation noisy or cutting off?Cause/solution L Press the navigator key {^} repeatedly while talking. L Try to relocate the base unit so that distance from location to use the handset will be minimized. L If the same problem occurs even if the handset is next to the base unit, send your unit for service. L Yes, you can add up to 6 handsets (including the handset(s) sold with your own base unit) to a single base unit. L To purchase accessory handset (KX-TGA939), please visit http://www. panasonic. com or call 1-800-332-5368. [. . . ] Reconnect AC adaptor. " is displayed. L1 1 Talk Line1 00-00-00 dB "Talk" is displayed. 2 =Volume MENU LINE2 MUTE Check if the telephone cord is properly connected to both the base unit and telephone line jack on the wall. Still displayed Press {s} , then check if the dial tone is heard from the speaker on the back. {s} No dial tone Try remedy for 1 on previous page. Dial tone is heard. Try to connect your telephone into a different line. Your telephone may need service when only back speaker provides a dial tone. Still displayed Your telephone may need service. Please visit http://www. panasonic. com/help for further troubleshooting. ­6­ TG9391_QG(e). fm Page 7 Thursday, July 3, 2008 9:25 AM Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. Handset {MENU} i {#}{1}{3}{0} LINE1 MENU LINE2 {MENU} Base unit Press and hold {LOCATOR} for 5 seconds until the registration tone sounds. [. . . ]