User manual PANASONIC KX-TGA715EX

[. . . ] This unit is an additional handset for use with the following Panasonic Digital Cordless Phones: KX-TG7100/KX-TG7120/KX-TG7150/KX-TG7170 KX-TG8100/KX-TG8120 KX-TG9120/KX-TG9140/KX-TG9150 You must register this unit to your base unit before it can be used. Charge the batteries for about 7 hours before initial use. Please read these operating instructions before using the unit and save them for future reference. 9 Symbols used in these operating instructions . [. . . ] L The charge indicator lights up when the handset is placed on the charger. Operation In continuous use Operating time KX-TGA715: 12 hours max. " when the handset is placed on the charger if it is not registered to a base unit. L It is normal for the handset to feel warm during charging. L If you want to use the unit immediately, charge the batteries for at least 15 minutes. L Clean the charge contacts of the handset, charger with a soft, dry cloth once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust, or high humidity. Note: L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby). l Battery operating time may be shortened over time depending on usage conditions and ambient temperature. L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries. L The battery strength may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and charge for at least 7 hours. Symbols used in these operating instructions I {>} i {ih} Note: L If you select a language you cannot read, press {ih}, press {j/OK}, press {^} 3 times, press {>}, press {V} 2 times, press {>}, press {V}, press {>}, select the desired language, press {>}, then press {ih}. L To change the voice announce language, see page 12. Registering the handset to your base unit register to: KX-TG7100/KX-TG7120/KX-TG7150/KXTG7170/KX-TG8100/KX-TG8120/KXTG9120/KX-TG9140/KX-TG9150 Ensure that the handset is switched on. If it is not on, press and hold {ih} for few seconds to turn the handset on. ­ Alarm function ­ Index search (Handset phonebook) ­ Copying the phonebook items between 2 handsets (KX-TGA715 and KXTGA717). l For KX-TG9140/KX-TGA914 users KX-TGA715/KX-TGA717 does not support camera monitoring features. L For KX-TG9150/KX-TGA915 users KX-TGA715/KX-TGA717 does not support internet call features. About 3 seconds, until the registration tone sounds. [. . . ] Example: When you transfer a call to handset 1 During an outside call, press {INT}. Example: When you make a conference call with handset 1 During an outside call, press {INT}. Set" i {>} Base unit: Press and hold {x} on the base unit for about 3 seconds until the registration tone sounds. *2 Handset: Wait until "Enter Base PIN" is displayed, then enter the base unit PIN (default: "0000"). [. . . ]