User manual PANASONIC KX-TGA717E

[. . . ] TGA715E_717E(e-e). book Page 1 Wednesday, August 2, 2006 2:46 PM Operating Instructions Additional Digital Cordless Handset Model No. KX-TGA715E KX-TGA717E KX-TGA715 This unit is an additional handset for use with the following Panasonic Digital Cordless Phones: KX-TG7100/KX-TG7120/KX-TG7160/KX-TG7180 KX-TG8100/KX-TG8120 KX-TG9120/KX-TG9140/KX-TG9150 You must register this unit to your base unit before it can be used. Charge the batteries for about 7 hours before initial use. Please read these operating instructions before using the unit and save them for future reference. TGA715E_717E(e-e). book Page 2 Wednesday, August 2, 2006 2:46 PM Table of Contents Preparation Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessory information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] L When receive a call while on the phone, the 2nd caller's phone number will not be announced even if you subscribe to both Caller ID and Call Waiting Caller ID services. L The announcement is heard at the ringer volume (page 16). L This feature can be turned on or off (page 12). List announce The handset announces phone numbers from the handset speaker while you are viewing the redial list, caller list, and phonebook. L If the displayed phone number has a P (pause), the handset inserts a 0. 5 second pause for each P and if the number has the other symbols (for example, ;, #, etc. ), the handset skips the symbols and announces the next number. Setting volume for voice announce You can set the volume for list announce. The volume for caller ID announce is set when setting the ringer volume on (page 16). 1 2 3 4 5 6 {j/OK} "Handset Setup" i {>} "Other Options" i {>} "Voice Announce" i {>} "Volume" i {>} Select the desired volume. L To turn the voice announce feature off, select the volume "Off". 7 {>} i {ih} Note: L The caller ID announce is heard at the handset ringer volume (page 16). When the volume for voice announce is set to "Off", the handset does not announce the phone number regardless of the ringer volume. Selecting language for voice announce 1 2 3 4 5 6 {j/OK} "Handset Setup" i {>} "Other Options" i {>} "Voice Announce" i {>} "Select Language" i {>} Select the desired language. i {>} i {ih} Note: L To change the display language, see page 16. 12 Helpline Tel. 01289 8333 TGA715E_717E(e-e). book Page 13 Wednesday, August 2, 2006 2:46 PM Basic Operations Basic Operations Making/answering calls Feature Power on Power off Making calls Answering calls Hanging up Receiver/speaker volume Making a call with redial list Erasing numbers in the redial list Muting your voice Call waiting: switching between callers Operation Press {ih} for about 1 second. i {C}/{s} {C} {ih} Press {^} or {V} while on a call. {R} i Press {^} or {V} to select the desired number. i {C}/{s} {R} i Press {^} or {V} to select the desired number. i {>} i "Erase" i {>} i "Yes" i {>} i {ih} While on a call, press {C/T}. To return to the conversation, press {C/T} again. If a second call is received while in a conversation, a beep tone will be heard. Press {R} button to switch between callers. Consult your service provider/ telephone company for details. Handset phonebook Feature Adding entries (up to 50 names and phone numbers) Operation {k} i {j/OK} i "New Entry" i {>} i Enter the party's name (16 characters max. ). i {j/OK} i Enter the party's phone number (24 digits max. ). i {j/OK} i "Save" i {>} i {ih} L To enter a name, see page 21. {k} i Press {^} or {V} to display the desired entry. [. . . ] Problem The handset does not announce the displayed phone number. Cause & solution L The handset ringer volume is turned off. L The voice announce feature is turned off. L While you are on an outside call, the handset does not announce phonebook information when searching the phonebook. [. . . ]