User manual PANASONIC KX-TGB212FX

[. . . ] 12 Preparation Basic Operation Basic Operation Making Calls . 15 Advanced Operation Speed Dialer . 21 Temporary Tone Dialing (For Rotary or Pulse Service Users) . 21 How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) . [. . . ] You can answer it by simply lifting the handset. Basic Operation Ringer Indicator MIC (SP-PHONE/HEADSET) and Indicator Using the speakerphone 1 2 3 Press (SP-PHONE/HEADSET). The indicator lights. Talk into the MIC (microphone). To hang up, press (SP-PHONE/HEADSET). The indicator light goes out. When the ringer volume is set to OFF (p. 11), the unit will not ring. 15 Speed Dialer Storing Phone Numbers in Memory You can store up to 10 phone numbers in memory. The dialing buttons ((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation. Make sure that a call is not put on hold. Memory Station Numbers (PROGRAM) (AUTO/LOWER) (PAUSE) (SP-PHONE/HEADSET) and Indicator 1 2 3 4 Press (PROGRAM). Enter a phone number, up to 22 digits. If you enter a wrong number, press (PROGRAM) and start again from step 1. Press (AUTO/LOWER). Press a memory station number ((0) to (9)). The unit will return to the standby mode. If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the standby mode, and start again from step 1. You can exit the programming mode in step 1 and 2 by pressing (PROGRAM). If a pause is required for dialing, press (PAUSE) where needed. The factory preset PIN code is "1111". Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). Press (MUTE). Press (5). Enter the current PIN code. "1111" is entered. ) Press (PROGRAM). If a correct PIN code is entered, a beep will sound. If a wrong PIN code is entered, 3 beeps will sound. Enter the correct PIN code and press (PROGRAM). To return to the standby mode, lift the handset and hang up. 6 7 Enter a new PIN code using a 4-digit number. "1234" is entered. ) Press (PROGRAM). A long beep sounds. The unit will return to the standby mode. Please write down your PIN code. If you forget your PIN code, consult your nearest Panasonic service center. 24 " Dial Lock You can prevent others from making a call to any number except the one pre-programmed in the memory of the EMERGENCY button. Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until the dial lock is canceled. Before using this feature, we recommend storing an emergency number in the memory This one-touch of the EMERGENCY button (p. [. . . ] Do not subject this unit to excessive smoke, dust, mechanical vibration or shock. CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions. Do not dispose of the battery(ies) in a fire. Do not open or mutilate the battery(ies). [. . . ]