User manual PANASONIC KX-TGC213

[. . . ] Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 45. [. . . ] Handset: Press MOKN, then wait until a long beep sounds. 3 Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. A MSELECTN 2 times a MOFFN MMENUN#131 R All handsets registered to the base unit are displayed. MbN: Select the handset you want to cancel. A MSELECTN MbN: “Yes” a MSELECTN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important: R See page 4 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details. Caller list Important: R Make sure the unit’s date and time setting is correct (page 13). Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed: – “Out of area”: The caller dials from an area which does not provide a Caller ID service. – “Private caller”: The caller requests not to send caller information. € “Long distance”: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Viewing the caller list and calling back 1 2 3 MCN CID Press MCN to search from the most recent call, or MDN to search from the oldest call. Note: R If the entry has already been viewed or answered, “ ” is displayed. Editing a caller’s phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”. Missed calls If a call is not answered, the unit treats it as a missed call. [. . . ] Com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. [. . . ]