User manual PANASONIC KX-TGD534

[. . . ] Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 42. [. . . ] Using the phonebook’s group feature (page 17), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Pdf 24 2016/11/29 10:57:38 Programming Important: R If you have set the alarm, the alarm sounds even if the silent mode is turned on. A MSAVEN Follow the directions on the display to complete the operation. Registering a handset to the base unit If for some reason the handset is not registered to the base unit, re-register the handset. 1 2 Changing the start and end time Handset: MMENUN#130 Base unit: Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. Handset: Press MOKN, then wait until a long beep sounds. 1 2 MMENUN#237 Follow the directions on the display to complete the operation. selecting groups to bypass silent mode 3 1 2 MMENUN#241 MbN: Select the desired groups. A MSELECTN R “ ” is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. MSAVEN a MOFFN Deregistering a handset 1 2 3 MMENUN#131 R All handsets registered to the base unit are displayed. MbN: Select the handset you want to cancel. A MSELECTN MbN: “Yes” a MSELECTN a MOFFN 3 Other programming Changing the handset name 1 2 MMENUN#104 Enter the desired name. A MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed: – “Out of area”: The caller dials from an area which does not provide a Caller ID service. – “Private caller”: The caller requests not to send caller information. [. . . ] ) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Telephone Parts One (1) Year Labor One (1) Year During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. [. . . ]