User manual PANASONIC KX-TGE244

[. . . ] Before initial use, see “Getting Started” on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 59. [. . . ] € “Block a single number”: The unit can reject calls from specific phone numbers. € “Block range of numbers”: The unit can reject calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. You can also set the unit to reject calls that do not have a phone number. When a call is received, the unit rings briefly*1 while caller information is being received. If the caller’s phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. If you do not want the first ring to sound, turn this setting to “Off” (page 34). Important: R Rejected calls are logged in the caller list. 8 MSAVEN a MOFFN n By entering phone numbers: 1 2 3 4 5 1 2 3 4 5 MMENUN#217 MbN: “Block a single number” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the phone number (24 digits max. MSAVEN a MOFFN Storing a range of numbers MMENUN#217 MbN: “Block range of numbers” a MSELECTN MMENUN a MbN: “Add” a MSELECTN Enter the desired number (2-8 digits). MSAVEN a MOFFN Storing unwanted callers Storing a single phone number Important: R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. N From the caller list: Blocking incoming calls that have no phone number You can reject calls when no phone number is provided, such as private callers or out of area calls. R To edit the number: MMENUN a MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. MMENUN MbN: “Save CID” a MSELECTN MbN: “Call block” a MSELECTN MbN: “Yes” a MSELECTN Edit the phone number if necessary (24 digits max. Setting the first ring for the call block list If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. A MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MMENUN#217 For assistance, please visit http://www. Pdf34 34 2013/11/22 14:22:28 Programming 2 3 4 MbN: “Block a single number” or “Block range of numbers” a MSELECTN MbN: Select the desired entry. Displaying the handset name You can select whether or not the handset name is displayed in standby mode. A MSAVEN a MOFFN To erase a number: MERASEN a MbN: “Yes” a MSELECTN a MOFFN Note: R When editing, press the desired dial key to add, MCLEARN to erase. 1 2 MMENUN#105 MbN: Select the desired setting. A MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important: R See page 5 for information on the available model. [. . . ] Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. [. . . ]