User manual PANASONIC KXTGF340

[. . . ] Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 62. [. . . ] Important: R You should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. Check the connection if you are diverting the baby monitor to an outside line. R This feature should not be used as a substitute for a medical or caregiver’s supervision. It is the caregiver’s responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitoring. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 33). 3 4 5 6 7 Changing the start and end time Handset / Base unit 1 2 MMENUN#237 Continue from step 3 for the handset or step 3 for base unit, “Turning silent mode on/off”, page 35. selecting groups to bypass silent mode Handset / Base unit 1 2 MMENUN#241 MbN: Select your desired groups. A MSELECTN R “ ” is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. MSAVEN Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room). 3 36 To monitor with a unit The internal baby monitor feature is only available: For assistance, please visit www. Com/support Programming – between handsets – between a handset and the base unit Handset 1 2 3 4 5 6 MbN: “Manual” a MSELECTN Enter the desired name. MMENUN#268 MbN: “On” a MSELECTN MbN: Select the desired unit’s number to monitor with. Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. note: R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to “On”. Handset 1 2 3 Press MMENUN on the handset being monitored. MbN: “On/Off” a MSELECTN MbN: “Off” a MSELECTN a MOFFN To monitor from an outside line If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. [. . . ] Mail-In Service--Online Online Repair Request To submit a new repair request and for quick repair status visit our web site at www. Com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. [. . . ]