User manual PANASONIC KXTGF353

[. . . ] Before initial use, see “Getting Started” on page 8. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 57. [. . . ] Selecting groups to bypass silent mode Handset / Base unit Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Using the phonebook’s group feature (page 23), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important: R Make sure the unit’s date and time setting is correct (page 13). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off Handset 1 MMENUN#241 2 MbN: Select the desired group. A MSELECTN R “ ” is displayed next to the selected group numbers. R To cancel the selected group: MbN: Select the group. 3 MSAVEN 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s room, for example) will automatically call the monitoring handset, base unit, or the phone number stored when it detects sound. Important: R You should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. For example, 1 MMENUN#238 2 MbN: Select the desired setting. a MSAVEN R If you select “Off” , press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 *: Select “AM” or “PM”. A MOKN 5 Enter the desired hour and minute you wish to end this feature. Check the connection if you are diverting the baby monitor to an outside line. R This feature should not be used as a substitute for a medical or caregiver’s supervision. It is the caregiver’s responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. [. . . ] Mail-in Service--Online Online Repair Request To submit a new repair request and for quick repair status visit our web site at www. Com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. [. . . ]