User manual PANASONIC KX-THA13

[. . . ] This unit is an accessory unit for use with the KX-TH102 base unit. You must register this unit with your base unit before it can be used. Please read these Operating Instructions before using the unit and save for future reference. 14 Symbols used in these operating instructions . [. . . ] Note: L If you have set the IP address for the cordless camera inappropriately, you will not be able to connect to the cordless camera. In this event, you must reset the cordless camera to its factory default settings and assign a valid IP address following the procedure on page 24. to reset the cordless camera , see "Resetting the cordless camera" on page 15. L If your browser is configured to use a proxy server, you cannot access the cordless camera properly. See if a proxy server is used or not with the following procedure. " check box is checked, turn it off by clicking the check box. If the "Use a proxy server" check box is checked, turn it off by clicking the check box. When [Standard Display] page is displayed in your web browser, click [Setup] tab. Enter a valid IP address and subnet mask. l The IP address should be a local (private) IP address. You cannot use a global IP address for the cordless camera. L Before you start monitoring, confirm that the camera lens of the cordless camera has been adjusted to the correct angle. l Only 1 person can access the cordless camera at a time. L While monitoring the cordless camera with your computer, you can view the room, but no sound can be heard. This feature allows you to monitor the view from the cordless camera using your computer. The monitored camera does not ring, allowing you to easily monitor a baby's room, for example, from different areas of the house. You can view the room when: ­ you access the cordless camera using your computer ("Monitoring the room j Z", page 27). ­ the cordless camera notifies your computer with a pop-up message when it detects motion and/or sound ("Cordless camera sensor j Z", page 27). ­ the cordless camera user notifies your computer with a pop-up message using the call button ("Cordless camera call button j Z", page 29). Important: L To use this feature, you must install the MULTI TALK V Camera Utility software in your computer. refer to the "Installation Guide for MULTI TALK V Software" for installation details. L Before monitoring using your computer, confirm that the base unit is connected to your computer or computer network (refer to the "Installation Guide for MULTI TALK V Software" for more information). [. . . ] This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. In obtaining repairs please ship the product prepaid to: Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. [. . . ]