User manual PANASONIC KX-TMC97B

[. . . ] After subscribing to Caller ID, this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on the phone line with the first caller, requires a subscription to both Caller ID with Name and Call Waiting Service. Attach your purchase receipt here. Energy Star: As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U. S. registered mark. Accessories (included) For extra orders, call 1-800-332-5368. AC Adaptor (p. [. . . ] · The LOCATOR/INTERCOM/TRANSFER indicator light goes out. ·The monitored handset user can stop being monitored by pressing (OFF). ·If the Room Monitor feature of the destination handset is off or the handset is on the base unit, busy tones will sound. For assistance, please call: 1-800-211-PANA(7262) 57 2-Way Radio Communication (When the System Has Additional Handsets) If you purchase one or more additional handsets (p. 26), you can use this feature (except for KX-TGA272S). A handset user can talk with another handset user regardless of the base unit location. 2-Way Radio communication, which is the direct communication between a pair of handsets, does not need the base unit interface. You need to turn the mode on on the handsets. Once the mode is on, the handset can be used only to talk with another handset, and the following features cannot be used on the handset: ­ Making/answering external and internal calls ­ Searching the Caller List or directory ­ Programming ­ Accessing mailboxes to listen to messages ­ Receiving Caller ID information After finish using this mode, remember to turn the mode off. Otherwise the battery operating time will be shortened (p. 13). To turn the 2-Way Radio mode on Make sure the handset is not being used. 1 2 3 4 5 Press (CONF/FUNCTION). Scroll to "2Way radio mode" by pressing Ö or Ñ. Line access number (9) (PBX) (9) \ (PAUSE/REDIAL) or (REDIAL/PAUSE) \ Phone number ·Pressing (PAUSE/REDIAL) or (REDIAL/PAUSE) once creates a 3. 5 second pause. This prevents misdialing when you redial or dial a stored number. ·Pressing (PAUSE/REDIAL) or (REDIAL/PAUSE) more than once increases the length of the pause between numbers. Cordless Telephone FLASH Button Pressing (FLASH/CALL!WAIT) also allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. ·Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing mode or the mute (p. 60). Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms". Make sure the base unit and the handset are not being used. 1 2 3 4 5 Press (CONF/FUNCTION), and scroll to "Initial setting" by pressing Ö or Ñ, and press á. Scroll to "Set tel line" by pressing Ö or Ñ, and press á. Scroll to "Set flash time" by pressing Ö or Ñ, and press á. ·The current setting is displayed. Caller ID edit HSet HSet tel line flash time :700ms SAVE Set answering Set dial mode Set line mode Set flash time GF Select the desired time by pressing Ö or Ñ. Press the right soft key ( SAVE ). ·A beep sounds. ·To exit the programming mode, press (OFF). ·If the unit is connected via a PBX, PBX functions (transferring a call etc. ) might not work correctly. [. . . ] 61 Phone Directory Sharing. . . . . . . . . . . . . . . . . . . 9, 21, 23, 82 Privacy Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Pulse service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 100 R Reception Booster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Recording Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]